EasyManua.ls Logo

Craftsman 580.752921 - Features and Controls

Craftsman 580.752921
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
KNOW YOUR PRESSURE WASHER
Read the Operator’s Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
FEATURES AND CONTROLS
A - Spray Gun — Controls the application of water onto cleaning
surface with trigger device. Includes trigger lock.
B - Accessory Tray — Provides convenient storage for accessories,
such as gun, nozzle extension, etc.
C - Spray Tips — Detergent, 0°, 15° and 40°: for various high
pressure cleaning applications.
D - Fold Down Handle — Handle and accessory tray fold flat atop
cold engine for space-saving storage.
E - Recoil Starter — Used for starting the engine manually.
F - Oil Fill/Dipstick — Check, add and drain engine oil here.
G - Water Inlet — Connection for garden hose.
H - High Pressure Outlet — Connection for high pressure hose.
J - Air Filter — Protects engine by filtering dust and debris out of
intake air.
K - Bottle Bracket — Cleaning solution bottle fits in wire form
bracket here. Concentrate bottle not included.
M - Engine Switch — Sets engine in starting mode for recoil starter
and stops a running engine.
N - Project Pro® PerfectMix™ Siphon — Mixes concentrate with
pressure washer spray.
P - Warning/Operating Instructions Tag — Identifies hazards and
proper procedure to start/stop pressure washer.
Q - Fuel Tank — Fill tank with regular unleaded fuel. Always leave
room for fuel expansion.
R - High Pressure Hose — Connect one end to water pump and
the other end to spray gun.
S - Nozzle Extension with Quick Connect — Allows you to switch
between four different spray tips.
Items Not Shown:
Pump — Develops high pressure.
Automatic Cool Down System — Cycles water through pump when
water reaches 125°-155°F. Warm water will discharge from pump
onto ground. This system prevents internal pump damage.
Identification Label — Provides model and serial number of
pressure washer. Please have these readily available if calling for
assistance.
B
A
C
D
Q
N
H
K
R
P
S
J
M
G
E
F
Not for
Reproduction

Related product manuals