To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 580/752352 and is the answer not in the manual?
General| Brand | Craftsman |
|---|---|
| Model | 580/752352 |
| Category | Pressure Washer |
| Language | English |
Details the terms of the one-year limited warranty against defects in material and workmanship.
Explains the various hazard symbols used in the manual and their corresponding meanings for safety.
Provides instructions for safely removing the pressure washer and its accessories from the shipping carton.
Outlines the step-by-step process for assembling the pressure washer system before initial use.
Provides a general overview and guidance on operating the pressure washer cleaning system.
Step-by-step instructions for starting the pressure washer engine for the first time or after idle periods.
Details the correct procedure for safely shutting down the pressure washer engine and system.
Guides users on selecting, attaching, and using the various ProjectPro™ nozzles for different cleaning tasks.
Instructs on attaching and using the HydroFoam™ launcher for applying detergents and cleaners.
Outlines the owner's duties for performing regular maintenance to ensure proper operation and warranty coverage.
Provides a chart detailing required maintenance tasks and their recommended intervals.
Lists essential checks and tasks to perform on the pressure washer before every operation.
Covers specific maintenance procedures for the pressure washer unit itself, like cleaning debris.
Covers essential maintenance tasks for the engine, including checking and changing oil.
Instructions for protecting the unit from freezing temperatures during winter storage.
Procedures for preparing the engine and pump for storage periods exceeding 30 days.
Addresses common issues with the pump, such as loss of pressure or chattering, and provides solutions.
Troubleshoots common engine issues like failure to start, rough running, or stalling.
Outlines the warranty statement and owner's duties for maintenance and presenting the engine for service.
