To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 875.191192 and is the answer not in the manual?
General| Product Type | Angle Grinder |
|---|---|
| Set Size | 1 |
| Drive Type | Electric |
| Model Number | 875.191192 |
| Voltage | 120V |
| Power Source | Corded Electric |
| Amperage | 7.5 amps |
| Wheel Diameter | 4.5 inches |
| Arbor Size | 5/8 inches |
Ensure impact-resistant eye protection meets ANSI Z87.1 standards for safe operation.
Use hearing protection if noise levels equal or exceed 85dBA for safe operation.
Discontinue use if experiencing tingling, numbness, or discomfort from vibration.
Operate tool at a maximum of 90 PSI to prevent injury and tool damage.
Keep chisel in contact with work surface and inspect accessories for damage.
Be aware of dust from construction activities containing chemicals known to cause harm.
Craftsman tools failing within one year of purchase will be repaired or replaced by Sears.
Designed for chipping, trimming, riveting, cutting, piercing, and peening with standard chisels.
Details stroke length, bore diameter, blows per minute, weight, and air consumption.
Instructions for inserting and removing chisels using the quick change retainer.
Recommends an in-line filter-regulator-lubricator and proper lubrication procedures.
