Craftsman 17125455 User Manual

iNDUSTRiALDOVETAILJIG
IMPORTANT:. The fo!lowing router bits are required for use
with this jig-
• VA #22437, or MAGNA #M 910t6, 1/4" Straight Router Bit, and
VA #22501, or MAGNA #M91114, 9t16" Dovetail Router Bit
which are used for THROUGH or OPEN JOINTS.
• VA #22500, or MAGNA #M91113, 1t2" Dovetail Router Bit,
which is used for all HALF BLIND JOINTS.
17125455
WARNING:
Beforeoperatingproduct, readthis
manualandfollow all its Safetyand
OperatingInstructions.

Craftsman 17125455 Specifications

General

Model Number	17125455
Brand	Craftsman
Category	Tools
Type	Impact Wrench
Number of Tools	1
Maximum Torque	450 ft-lbs
Drive Size	1/2 inch

Summary

Safety Guidelines and Definitions

General Safety Instructions for Power Tools

Additional Safety Instructions for the Industrial Dovetail Jig

Assembly Instructions

Assembly of the Cam Handles and Pivot Shaft to the Dovetail Base

Details attaching the cam handles and pivot shaft for precise template positioning.

Assembly of the Templates

Guides the user in assembling the template stiffener and brackets to the templates.

Alignment of the Templates

Explains how to correctly align the assembled templates on the dovetail base for precise cuts.

Assembly of the Adapter Plate to the Router

Instructions for attaching the universal router adapter plate to various router models.

Installation of the Dovetail Jig

Mounting the Dovetail Jig to a Work Surface or Workbench Using Clamps

Provides methods for securely mounting the jig to a workbench using clamps or a mounting board.

Operation of the Dovetail Jig

Adjusting the Depth-of-Cut of the Router Bit

Guides on setting the router bit depth accurately for precise dovetail cuts.

Clamping the Workpieces to the Dovetail Base

Making Drawers with Half Blind Flush Joints

Making Drawers with Half Blind Flush Offset Joints

Making Drawers with Half Blind Rabbeted Joints

Making Projects with Open (Through) Joints

Procedure for Cutting Project Front and Back

Troubleshooting Dovetail Joints

Troubleshooting Joint Spacing