To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.275371 and is the answer not in the manual?
General| Model Number | 917.275371 |
|---|---|
| Category | Lawn Mower |
| Engine | Briggs & Stratton |
| Engine Displacement | 190cc |
| Cutting Width | 21 inches |
| Speed Control | Variable Speed |
| Wheel Size (front) | 8 inches |
| Mulching Capability | Yes |
| Bagging Capability | Yes |
| Side Discharge Capability | Yes |
| Engine Type | 4-Cycle |
Details the two-year limited warranty covering material and workmanship for riding equipment.
Provides essential instructions for safe operation, including operator responsibilities and area clearing.
Details critical safety precautions for operating the tractor on slopes to prevent tip-overs.
Highlights safety rules to prevent child injuries related to tractor operation.
A comprehensive checklist of tasks to perform before operating the tractor.
Identifies and describes the function of major tractor controls and levers.
Instructions on how to properly engage the parking brake system.
Details on how to stop the mower blades, ground drive, and engine safely.
Guidance on operating the throttle control for optimal engine performance.
Procedure for controlling tractor movement using the gearshift and clutch/brake.
Procedure for verifying the engine oil level before the first start.
Guidance on selecting and adding the correct type of gasoline to the fuel tank.
Detailed steps for starting the engine in both warm and cold weather conditions.
Information on selecting the correct oil and its viscosity grade for the engine.
Step-by-step instructions for draining and refilling the engine oil.
Crucial safety warnings to follow before performing any service or adjustments.
Procedure for adjusting the throttle cable for proper engine speed control.
Steps for fine-tuning the carburetor for optimal engine performance.
Common causes and corrections for the engine failing to start.
Troubleshooting steps for when the engine is difficult to start.
Diagnosing and fixing issues preventing the engine from turning over.
Resolving problems where the engine makes clicking sounds but won't start.
Identifying causes for reduced engine power and how to correct them.
Troubleshooting causes of excessive vibration during operation.
Addressing issues where the engine shuts off when shifting into reverse.
Diagnosing why the engine continues to run when the operator leaves the seat.
Solutions for achieving an even and quality cut with the mower.
Troubleshooting why the mower blades are not turning.
Identifying and fixing issues related to improper grass discharge.
