To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.28712 and is the answer not in the manual?
General| Brand | Craftsman |
|---|---|
| Model | 917.28712 |
| Category | Lawn Mower |
| Language | English |
Warns about severe injury or death from the cutting machine if safety instructions are not followed.
Advises disconnecting the spark plug wire to prevent accidental starting during setup or repair.
Details critical safety precautions for operating the tractor on slopes to prevent tip-overs and loss of control.
Emphasizes the dangers children pose and the need to keep them away from the operating tractor.
Reinforces safe operation on slopes, including maximum angle and turning precautions.
Guides the user through the process of attaching the steering wheel assembly to the tractor.
Details how to correctly install the tractor seat onto the seat pan.
Continues instructions for seat installation and adjustment for operator comfort.
Explains how to adjust the seat for optimal operator positioning and pedal access.
Provides steps for starting the engine and driving the tractor off the skid.
A pre-operation checklist for ensuring all assembly and safety steps are completed.
Defines hazard symbols (DANGER, WARNING, CAUTION) and their implications for safety.
Identifies and describes the function of each major control on the tractor.
Details the procedure for setting the parking brake, including the operator presence sensing switch.
Explains how to stop the mower blades, ground drive, and the engine safely.
Guides the user on adjusting the mower deck height for desired grass cutting.
Explains how to engage and operate the mower blades, and safety precautions.
Covers essential checks before starting the engine, such as oil level.
Offers crucial safety advice for operating the tractor on slopes, including maximum angle.
Details how to check the engine oil level and add oil if necessary.
Provides instructions on safely adding gasoline, including fuel type and quantity.
Outlines the procedure for starting the tractor engine, including warm and cold weather starting.
Lists periodic maintenance tasks for the tractor, including brakes, tires, and fasteners.
Outlines regular maintenance for the engine, such as oil and air filter checks.
Lists essential checks to perform before every use of the tractor.
Details how to check the tractor's brake system for proper stopping distance.
Explains the importance of ensuring these safety systems are functioning correctly.
Outlines specific checks for the operator presence sensing switch.
Details checks for the Reverse Operation System (ROS) to ensure it works as intended.
Emphasizes the importance of sharp blades and using approved replacement blades.
Provides step-by-step instructions for removing and installing mower blades.
Provides a detailed guide on how to drain and refill the engine oil.
Explains the importance of a clean air filter and how to service it.
Lists critical safety precautions to follow before performing any service or adjustments.
Provides detailed steps for removing the mower deck from the tractor.
Guides the user through the process of reinstalling the mower deck onto the tractor.
Explains how to level the mower deck for optimal cutting performance.
Explains how to adjust the mower deck for front-to-back levelness.
Guides the user through installing the motion drive belt onto pulleys and keepers.
Details how to visually adjust the mower deck for side-to-side levelness.
Provides instructions for removing and installing the mower drive belt.
Details the process for removing and installing the motion drive belt.
Provides step-by-step instructions for replacing the tractor battery.
