To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.28713 and is the answer not in the manual?
General| Engine Type | Briggs & Stratton |
|---|---|
| Engine Power | 6.75 HP |
| Engine Displacement | 190cc |
| Cutting Width | 21 inches |
| Drive Type | Self-Propelled |
| Drive System | Rear Wheel Drive |
Details the limited warranty coverage for the tractor over a two-year period.
Instructions for safe operation, including operator responsibilities and hazard awareness.
Step-by-step guide for assembling the steering wheel to the tractor.
Detailed steps for securely installing the tractor seat onto the seat pan.
Ensuring the tractor's brake system is functioning safely and effectively.
Explanation of various symbols used on the tractor and in its literature.
Definitions of DANGER, WARNING, CAUTION, HOT SURFACES, and FIRE hazard symbols.
Identification and basic function of key tractor controls and levers.
Step-by-step instructions for engaging and securing the parking brake.
Guidelines for safely operating the tractor on slopes up to 15 degrees.
Procedures for starting the engine in warm and cold weather conditions.
A schedule outlining maintenance tasks based on operating hours and time intervals.
Ensuring the operator presence and Reverse Operation System function correctly.
Selecting the correct engine oil and procedures for changing oil and filter.
Essential safety steps to take before performing any service or adjustments.
Instructions for leveling the mower deck side-to-side and front-to-back.
Procedure for adjusting the idle mixture valve and speed for optimal engine performance.
Common causes and corrections for the tractor engine failing to start.
Diagnosing and resolving issues causing the engine to start with difficulty.
Identifying causes and solutions when the engine does not crank.
Resolving issues where the engine clicks but fails to start.
Diagnosing and fixing causes for the tractor experiencing a loss of power.
Diagnosing and fixing causes of excessive vibration during tractor operation.
Addressing the safety issue of the engine continuing to run with operator off seat.
Identifying and resolving causes of poor cutting performance or uneven grass height.
Diagnosing why mower blades are not rotating and their potential causes.
Resolving issues related to poor grass discharge, clogging, or clumping.
Diagnosing why the engine stalls when the tractor is shifted into reverse.
