EasyManua.ls Logo

Craftsman 917.292381 User Manual

Craftsman 917.292381
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Owner's Manual
CRAFTSMAN+
3.75 HP
17 INCH TINE WIDTH
FRONT TINE
TILLER
Model No.
917.292381
Safety
Assembly
Operation
Maintenance
Espanol
° Repair Parts
O
CAUTION:
Read and follow all Safety
Rules and Instructions before
operating this equipment.
Sears, Roebuck and Co., Hoffman Estates, II 60179
Visit our Craftsman website:www.sears.com/craffsman
Question and Answer IconNeed help?

Do you have a question about the Craftsman 917.292381 and is the answer not in the manual?

Craftsman 917.292381 Specifications

General IconGeneral
ManufacturerCraftsman
Model Number917.292381
CategoryTiller
Engine Power5.5 HP
Tilling Depth6 inches
Tine DirectionForward-rotating
Number of Tines4
Oil Capacity20 oz
Engine Type4-Cycle
Weightunknown
Tine Width16 inches
Wheel Size8 inches

Summary

Warranty Information

Safety Rules

Training

Instructions for proper operator training and familiarization with controls.

Preparation

Steps to take before operating the tiller for safety.

Operation

Know Your Tiller

Familiarize yourself with tiller controls and symbols.

Meets ANSI Safety Requirements

Information on tiller compliance with safety standards.

Tiller Usage and Controls

Instructions on operating tiller controls, stopping, wheels, tilling, and transport.

Starting Procedures

Steps for starting the engine, including fueling and oil checks.

Maintenance and Storage

Maintenance Schedule and Recommendations

Routine maintenance tasks, frequencies, and general advice.

Pre-Operation Checks

Essential checks before operating the tiller.

Engine Care and Lubrication

Procedures for engine oil, air cleaner, cooling system, and lubrication.

Component Maintenance

Maintenance of muffler, spark plug, transmission, and cleaning.

Service and Adjustments

Procedures for handle height, tine arrangement, belt replacement, and adjustments.

Storage Preparation

Steps for preparing the tiller for long-term storage.

Assembly

Tools and Preparation

Tools required for assembly and defining operator's position.

Handle and Depth Stake Installation

Steps for unpacking and attaching the handle and depth stake.

Adjustments and Tine Operation

Adjusting handle height, tilling width, and checking tine operation.

Breaking In Your Tiller

Tilling Hints

Cultivating

Troubleshooting

Engine Will Not Start

Causes and corrections for a tiller that won't start.

Engine Hard to Start

Reasons and solutions for difficult engine starting.

Loss of Power

Diagnosing and fixing issues causing reduced tiller power.

Engine Overheats

Identifying and resolving engine overheating problems.

Tiller Handling Issues

Addressing issues like bounce, clumping, and laboring.

Repair Parts

Handle Assembly Parts

Parts list and diagrams for the handle assembly.

Belt Guard and Pulley Assembly Parts

Components for the belt guard and pulley system.

Wheel and Depth Stake Assembly Parts

Parts for the wheel and depth stake assembly.

Tine Assembly Parts

Parts list for the tiller's tine assembly.

Transmission Parts

Components related to the tiller's transmission.

Decals

Identification and location of tiller decals.

Briggs & Stratton Engine

Engine Components Diagram

Illustrated breakdown of engine parts for reference.

Engine Gasket and Kit Information

Details on gasket sets and carburetor kits.

Engine Part Number Reference

Comprehensive list of engine part numbers and their descriptions.

Related product manuals