To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.292360 and is the answer not in the manual?
General| Manufacturer | Craftsman |
|---|---|
| Model Number | 917.292360 |
| Engine | Briggs & Stratton |
| Engine Type | 4-Cycle |
| Tilling Depth | Up to 8 inches |
| Forward Speeds | 1 |
| Reverse Speeds | 1 |
| Wheel Size | 8 inches |
| Type | Tiller |
| Fuel Capacity | 1.6 quarts |
| Tine Rotation | Counter Rotating |
Operator training on controls and safe use, plus equipment/area preparation.
Safe practices during tiller operation and hazard awareness.
Rules for safe maintenance and equipment storage.
Highlights key warnings and cautions for operator safety.
Specifications for horsepower, displacement, fuel, and oil.
Details on the correct spark plug type and gap.
Terms and conditions of the tiller's warranty coverage.
Listing of available engine and tiller maintenance accessories.
Required tools, hardware, and position definitions for assembly.
Instructions for attaching the tiller handle.
Steps for unpacking and securing the handle.
Guide to installing depth stake and adjusting handle/width.
Overview of tiller components, controls, and symbols.
Instructions for using the tiller and safe stopping.
Adjusting depth stake and wheels for tilling.
Guidelines for moving and starting the tiller.
Fueling the tiller and the engine starting process.
Initial run-in and tips for effective tilling.
How to use the tiller for cultivating weeds.
Schedule for service and lubrication chart.
Owner's duties for maintaining the tiller.
Details on oil, viscosity, and air cleaner care.
Maintaining engine cooling and muffler.
Replacing spark plug and transmission service.
Adjusting handle height and tine configuration.
Adjusting tine width and performing operation checks.
Adjusting the tine control cable.
Procedures for belt guard and V-belt service.
Adjusting carburetor and warning about governor tampering.
Preparing tiller and engine for long-term storage.
Exploded view and part numbers for the handle.
Parts for belt guard and pulley system.
Components for wheels and depth stake.
Parts for the tine mechanism.
Parts list for the tiller's transmission.
Identification of decals and owner's manuals.
Parts diagrams and numbers for the engine.
