To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.292481 and is the answer not in the manual?
General| Manufacturer | Craftsman |
|---|---|
| Model Number | 917.292481 |
| Category | Tiller |
| Engine | Briggs & Stratton |
| Engine Type | 4-cycle |
| Engine Displacement | 208cc |
| Tilling Depth | Up to 8 inches |
| Number of Tines | 4 |
| Wheel Size | 8 inches |
| Oil Capacity | 20 oz |
| Tine Rotation | Forward |
| Fuel Tank Capacity | 0.5 gallons |
Introduces the Craftsman Front Tine Tiller, Model No. 917.292481, and highlights key safety warnings.
Details the terms and conditions of the limited one-year warranty for the Craftsman Tiller.
Provides essential safety training and preparation instructions for operating the tiller safely.
Lists critical safety rules and precautions to follow during the operation of the tiller.
Covers essential safety guidelines related to maintaining and storing the tiller properly.
Details required fuel/oil types, capacities, and other tiller specifications.
Outlines owner duties and lists available tiller accessories.
Lists necessary tools and components included in the hardware pack for tiller assembly.
Instructions for unpacking the tiller and attaching the handle column.
Guides assembly of the depth stake, including securing its support.
Introduces tiller controls and components, advising manual and safety rule review.
Explains key controls like Forward Tine, Choke, and Throttle controls.
Details procedures for stopping tines/engine and explains tilling operations.
Instructions for safe tiller transport and proper engine oil filling.
Instructions for safely adding gasoline and starting the tiller's engine.
Details initial break-in and offers practical tilling advice.
Explains cultivating for weed control and soil moisture retention.
Presents a chart of maintenance tasks and their recommended service intervals.
Advises on tiller maintenance for warranty and performance.
Illustrates lubrication points and references the lubrication chart.
Details correct oil type, viscosity, and procedures for changing engine oil.
Explains servicing the air cleaner cartridge, including cleaning/replacement.
Instructions for maintaining the engine's air cooling system.
Muffler inspection and spark plug replacement for engine health.
Guides adjusting handle height and configuring tines for different tilling paths.
Details checking the proper operation of the tiller's tines.
Covers belt guard removal and V-belt replacement process.
Explains carburetor is factory preset, provides guidance for service adjustments.
Outlines tiller cleaning, inspection, and lubrication before storage.
Details engine preparation for storage, including fuel, oil, and cylinder lubrication.
Advice for tiller storage, including fuel handling and indoor storage.
Lists causes/corrections for engine not starting or hard starting issues.
Addresses power loss, identifying causes and solutions.
Covers engine overheating, bounce, and difficult handling troubleshooting.
Solves issues with tiller movement or laboring, relating to controls/adjustments.
Diagram and part list for the tiller's handles assembly.
Exploded view and part numbers for belt guard/pulley assembly.
Components and part numbers for wheel/depth stake assembly.
Illustrates tine assembly with a part breakdown.
Diagram and part list for the tiller's transmission.
Shows decal placement and lists their descriptions.
Exploded view of Briggs & Stratton engine, identifying major components.
Illustrates carburetor, gasket sets, and overhaul kit.
Shows components related to fuel tank and air cleaner system.
Details engine flywheel, starter parts, and associated components.
Comprehensive list of engine part numbers and descriptions.
Continues engine part number index and descriptions.
Lists Sears customer service phone numbers and websites for various services.
