To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.292460 and is the answer not in the manual?
Proper familiarization with controls and safe operation procedures.
Inspect the area and prepare the tiller before use.
Guidelines for safe operation of the tiller, including controls and precautions.
Keeping the tiller in safe working condition and proper storage procedures.
A schedule outlining regular maintenance tasks and intervals.
General advice for maintaining the tiller and its warranty.
A chart detailing lubrication points and types for the tiller.
Essential checks to perform before operating the tiller.
Instructions on keeping the unit properly lubricated.
Guidelines for selecting and using engine oil based on temperature.
Step-by-step instructions for changing the engine oil.
Procedures for servicing the air cleaner cartridge.
How to maintain the engine's cooling system for optimal performance.
List of tools needed for assembling the tiller.
Explanation of operator position reference in the manual.
List of hardware components included in the assembly pack.
Instructions and precautions for unpacking the tiller.
Step-by-step guide to assembling the tiller handles.
Instructions for assembling the reverse rod mechanism.
Procedure for installing the depth stake assembly.
Information on adjusting the tiller handle height.
How to adjust the tiller's tilling width.
Checking the tine operation before first use.
Familiarization with tiller controls and safety symbols.
Compliance with American National Standards Institute safety standards.
Instructions on operating the tiller, including stopping and tilling.
Procedures for stopping the tiller's tines and engine safely.
How speed and depth of tilling are regulated.
Adjusting the depth stake for desired tilling depth.
Adjusting wheel position for optimal tilling.
Detailed explanation of how to operate the tines.
Safety precautions and methods for transporting the tiller.
Instructions and precautions for adding gasoline to the tiller.
Important checks and precautions before starting the engine.
Step-by-step guide to filling the engine with the correct type and amount of oil.
Detailed instructions on how to start the tiller's engine.
Procedure for breaking in the tiller's belts and tines.
Tips and guidance for effective and safe tilling operations.
How to use the tiller for cultivating weeds between rows.
Maintenance and inspection of the muffler and spark arrester.
Recommendations for spark plug replacement and type.
Information regarding the tiller's transmission lubrication.
Instructions for cleaning the tiller and protecting its surfaces.
Instructions for adjusting the handle height for better operator comfort.
How to assemble tines for different tilling or cultivating needs.
Assembling tines for a 24-inch tilling path.
Assembling tines for a 12-3/4 inch tilling path.
Procedures for checking and adjusting tine operation.
Steps for replacing the tiller's V-belts.
How to remove the V-belts from the tiller.
Detailed instructions for installing new V-belts.
Instructions for removing and replacing the belt guard.
Procedure for removing the belt guard for maintenance.
Guide to adjusting the tiller's carburetor settings.
Initial setup steps for carburetor adjustment.
Final adjustments for the carburetor after starting the engine.
How to adjust the engine's idle speed.
Testing and adjusting engine acceleration.
Steps for preparing the tiller for storage.
Important steps to prevent fuel system issues during storage.
Procedures for draining and refilling engine oil for storage.
How to protect the engine cylinders during storage.
General storage advice and precautions for the tiller and its parts.
Common causes and corrections for an engine that will not start.
Solutions for an engine that is difficult to start.
Troubleshooting steps for reduced engine power.
Causes and remedies for engine overheating issues.
How to address issues with tiller bounce or difficult handling.
Troubleshooting for when soil clumps or balls up during tilling.
Diagnosing why the engine runs but the tiller does not move.
Identifying reasons for the engine laboring during tilling.
Illustrated parts breakdown and list for the handle assembly.
Illustrated parts breakdown for belt guard and pulley components.
Illustrated parts breakdown for wheel and depth stake components.
Illustrated parts breakdown for the tine assembly.
Illustrated parts breakdown for the transmission assembly.
List and illustration of various decals for the tiller.
Illustrated parts breakdown for the engine.
Further illustrated parts breakdown for the engine components.
Additional illustrated parts breakdown for engine components.
Comprehensive list of engine parts with part numbers.
Detailed listing of engine parts and their corresponding numbers.
General