To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.387240 and is the answer not in the manual?
General| Engine Power | 6.75 HP |
|---|---|
| Engine Displacement | 190cc |
| Cutting Width | 21 inches |
| Deck Material | Steel |
| Speed Control | Variable speed |
| Fuel Tank Capacity | 1.6 quarts |
| Oil Capacity | 20 oz |
| Starter Type | Recoil |
| Mulching Capability | Yes |
| Bagging Capability | Yes |
| Side Discharge Capability | Yes |
| Cutting Height | 1.25 to 3.75 inches |
| Cutting Height Adjustment | Dual-lever |
| Drive System | Rear-wheel drive |
| Engine Type | 4-cycle Briggs & Stratton |
| Wheel Size | 8 inches (front), 11 inches (rear) |
Familiarize yourself with controls, operation, and safety measures before use.
Check the area, wear safety glasses, and dress appropriately for safe mowing.
Instructions for unfolding and securing the mower handle for use.
Familiarize yourself with mower controls, symbols, and safety features.
How the operator presence control bar starts and stops the engine safely.
Using the starter handle and engine speed control lever.
Information on engine speed settings and the federal engine zone control requirement.
Instructions on how to adjust the lawn mower's cutting height.
Steps to install the discharge deflector for side discharge operation.
Guidance on checking and filling engine oil before starting the mower.
Step-by-step guide for starting the engine, including priming and fuel checks.
Best practices for mulching, including blade recutting and avoiding wet grass.
Schedule for regular maintenance tasks, including checks and replacements.
Advice on warranty, periodic adjustments, and annual part replacement.
Tasks to perform before starting the mower, like checking oil and fasteners.
Instructions for lubricating the mower and caring for bearings.
Diagram illustrating lubrication points on the lawn mower.
Purpose and replacement of the rear deflector to minimize thrown objects.
Instructions for adjusting the mower handle to different height positions.
Steps for storing the fuel system, including draining or using stabilizer.
Procedure for draining and storing engine oil for the off-season.
Adding oil to the cylinder for storage to prevent rust and corrosion.
General advice on storing gasoline, cans, and the mower itself.
Table listing common problems, their causes, and recommended corrections.
