Do you have a question about the Craftsman 917.387440 and is the answer not in the manual?
Model Number | 917.387440 |
---|---|
Engine | Briggs & Stratton |
Engine Displacement | 190cc |
Cutting Width | 22 inches |
Cutting Height | 1.25 - 3.75 inches |
Cutting Height Positions | 6 |
Speed Settings | Variable |
Fuel Tank Capacity | 1.6 quarts |
Oil Capacity | 20 oz |
Mulching Capability | Yes |
Bagging Capability | Yes |
Side Discharge Capability | Yes |
Wheel Size | 8 inches (front) |
Read this operator's manual carefully. Become familiar with the controls and know how to operate your mower properly.
Always thoroughly check the area to be mowed and clear it of all stones, sticks, wires, bones, and other foreign objects.
Keep your eyes and mind on your mower and the area being cut. Do not let other interests distract you.
Read these instructions and this manual in its entirety before you attempt to assemble or operate your new lawn mower.
The engine speed was set at the factory for optimum performance. Speed is not adjustable.
Federal regulations require an engine control to be installed on this lawn mower.
Adjust cutting height to suit your requirements. Medium position is best for most lawns.
Your lawn mower is shipped without oil in the engine.
Fill fuel tank. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane.
To start a cold engine, push primer three (3) times before trying to start.
Fill in dates as you complete regular service.
Check engine oil level. Check for loose fasteners.
Keep unit well lubricated (See 'LUBRICATION CHART').
Your engine will not run properly and may be damaged by using a dirty air filter.
Change your spark plug each year to make your engine start easier and run better.
For best results, mower blade must be kept sharp. Replace bent or damaged blades.
Before tipping lawn mower to drain oil, drain fuel tank by running engine until fuel tank is empty.
Lists common causes and corrections for engine not starting.