Do you have a question about the Craftsman 919.167780 and is the answer not in the manual?
Model Number | 919.167780 |
---|---|
Type | Portable |
Oil-Free | Yes |
Maximum Pressure | 150 PSI |
Voltage | 120 V |
Motor | Induction |
Amperage | 15 Amps |
Defines the meaning of DANGER, CAUTION, and WARNING safety symbols.
Provides critical instructions for safe operation and handling of the equipment.
Details risks associated with explosion or fire and prevention methods.
Outlines conditions leading to tank weakening and potential explosion.
Discusses risks from compressed air streams and flying particles.
Covers dangers of electrical shock and necessary precautions.
Explains risks of inhaling contaminated air and safe breathing practices.
Warns about burns from hot parts and injury from moving components.
Addresses risks of falling and safe transportation practices.
Defines technical terms used in the manual for better understanding.
Lists various accessories and tools compatible with the air compressor.
Provides an overview of assembly steps and required tools.
Guides on safely unpacking the unit and identifying components.
Details how to attach wheels and rubber feet for stability.
Specifies ideal location, electrical grounding, and setup.
Guidelines for extension cords and voltage/circuit protection.
Introduces the user to the main controls and components of the air compressor.
Explains the function of each control and component during operation.
Provides sequential steps on how to safely turn off the air compressor.
Outlines essential checks, startup, and break-in procedures.
Guides the user on the correct procedure to start the air compressor.
Lists routine maintenance tasks the user is responsible for performing.
Explains how to test the safety valve and drain condensation from the tank.
Details how to inspect, clean, or replace the air filter.
Explains the motor's overload protection and potential issues.
Step-by-step guide to cleaning or replacing the check valve.
Instructions for replacing the air pressure regulator.
Provides guidelines for storing the air compressor safely and effectively.
Addresses safety valve, pressure, and fitting leak issues.
Guides on identifying and fixing air leaks at fittings, valves, and the tank.
Helps diagnose knocking noises and insufficient air delivery.
Covers regulator leaks and shut-off failures.
Provides solutions for a motor that fails to start or run.