Craftsman 919.175261 User Manual

SEARS
OWNERS
MANUAL
MODEL NO.
919.175261
Usted
721Y
Air
Compressor
iMPORTANT:
Read the Safety Guidelines
and Al! instructions
Carefully Before Operating
[ 8t9
ONE STAGE
AiR COIVIPRE= OR
ASSEMBLY
0PERATION
MAINTENANCE
REPAIR PARTS
Record in the spaces provided.
(1) The model number which can be found
on the label on the front of the air tank
saddle.
(2) The code number which can be found
on the foil label on the side of the air
tank.
(3) The Manufacturer's Number (ASME
Code Compressors only} is located on
the metal data plate which is welded
onto the side of the air tank. (This data
plate is painted the same color as the
tank.)
(4} The Motor Manufacturer's name which
is located on the motor label.
(5) The Motor Mfg. number - also located
on the motor _abel.
Retain these numbers for future refer-
once,
Model No.
Code No.
Mfg. No.
Motor Mfg. Name
Motor Mfg. No.
Sears, Roebuck and Coo, Chicago, IL 60684 U.S.A,

Craftsman 919.175261 Specifications

General

Model Number	919.175261
Tank Capacity	33 gallons
Max Pressure	150 PSI
Power Source	Electric
Horsepower	1.6 HP
Weight	120 lbs
Voltage	120 V
Amperage	15 A
Type	Portable

Summary

Safety Guidelines

Warning and Caution Symbols

Important Safety Information

Highlights critical safety hazards that can cause serious injury or death.

Hazard Identification and Prevention

Safety Guidelines - Continued

Electricity and Moving Parts Safety

Covers electrical shock hazards and risks associated with moving parts.

Toxic Vapors and Air Tank Safety

Addresses hazards from toxic vapors and risks related to air tank modifications or failure.

Vibration Safety

Specification Chart

Description of Operation

Installation and Break-in Procedures

Mounting and Securing

Lubrication and Oil Requirements

Wiring Instructions

Details electrical connection requirements, grounding, and wire gauge recommendations.

Break-In Procedures

Initial Setup and Checks

Covers rechecking wiring, oil level, and opening the outlet valve.

Break-In Run and Leak Check

Instructions for running the compressor for 30 minutes and checking for air leaks.

Final Checks and Connections

Operating Procedures

Pressure Limit Warning

Emphasizes checking tool pressure ratings and not exceeding the regulator outlet pressure.

Maintenance

Oil - Checking and Changing

Details daily oil level checks and recommended oil change intervals.

Air Tank - Draining Water

Safety Valve Inspection

Belt Replacement

Pulley and Flywheel - Alignment

Troubleshooting Guide

Excessive Tank Pressure / Air Leaks

Troubleshooting for safety valve popping off, air leaks at fittings, check valve, and tank welds.

Air Leak from Safety Valve

Restricted Air / Belt Issues

Motor Not Running

Diagnoses for motor overload, pressure switch issues, defective capacitors, or blown fuses.

Restricted Air Intake / Low Air Supply

How to Order Repair Parts