To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 987.293330 and is the answer not in the manual?
Crucial safety information covering training, preparation, and operation.
Safety precautions specifically for maintenance and storage procedures.
Procedures for unpacking, checking for damage, and initial component installation.
Instructions for attaching levers, cables, and related components for tiller control.
Steps for checking transmission oil level and tire pressure.
Ensuring all hardware is securely tightened before operation.
Familiarization with the tiller's features and controls.
Detailed explanation of each control's location and function.
Procedures for safely starting and stopping the tiller's engine.
Guidance on effective and safe tilling methods, including depth and patterns.
Safe procedures for loading and unloading the tiller into a vehicle.
Overview of recommended maintenance tasks and their frequency.
Detailed instructions for lubrication, oil checks, and hardware checks.
Steps for checking and changing transmission and engine oil.
Maintenance for air cleaner, spark plug, and engine cleaning.
Procedure for adjusting the wheel gear cable for proper engagement.
Inspecting tines for wear and instructions for their removal and installation.
Checking and adjusting tension for drive belts, including removal/installation.
Steps for preparing and storing the tiller for extended periods.
Instructions for preparing the fuel system, oil, and cylinder for storage.
Components for the forward/reverse idler and control levers.
Parts for handlebars, hood, and depth regulator.
Components related to the tines, wheels, and drive shafts.
Parts for the transmission housing, drive shaft, and related seals.
Diagrams and parts list for the main engine components.
Diagrams and parts list for the carburetor and its components.
Diagrams and parts list for the recoil starter mechanisms.
General