Craftsman B2000 User Manual

7
ASSEMBLY
WARNING:
To avoid serious personal injury and
damage to the unit, shut the unit off before removing or
installing the blower tube or nozzle.
Fig. 1
Blower Outlet
Upper
Blower Tube
Tab
Slot
WARNING:
To prevent serious personal injury, never
operate the unit without the upper blower tube firmly
installed.
Fig. 2
Upper Blower Tube
Nozzle
Hole
Tab
ASSEMBLING THE UNIT
• Always install the upper blower tube.
• Only use the nozzle to concentrate and intensify the air flow
when needed. DO NOT use the nozzle for general work or for
long periods.
Installing the Upper Blower Tube
1. Set the unit on a flat, level surface.
2. Align the slot on the upper blower tube with the tab on the
blower outlet (Fig. 1).
3. Push the upper blower tube onto the blower outlet until the tab
locks securely into the slot (Fig. 1).
Installing the Nozzle
1. Set the unit on a flat, level surface.
2. Align the tab on the nozzle with the hole on the upper blower
tube (Fig. 2).
3. Push the nozzle into the upper blower tube until the tab locks
securely into the hole (Fig. 2).
Removing the Nozzle
1. Set the unit on a flat, level surface.
2. Firmly press the tab on the nozzle inward and pull the nozzle out
of the upper blower tube (Fig. 2).

Craftsman B2000 Specifications

General

Brand	Craftsman
Model	B2000
Category	Blower
Language	English