To Next PageTo Next Page
Need help?Do you have a question about the Craftsman C950-52930-011-H.P. and is the answer not in the manual?
General| Engine Displacement | 208cc |
|---|---|
| Clearing Width | 24 inches |
| Auger Material | Steel |
| Speed Settings | 6 Forward / 2 Reverse |
| Throw Distance | 40 feet |
| Stages | 2-stage |
| Starter Type | Electric start |
General safety guidelines for operating a walk-behind snow blower.
Instructions for operators to become familiar with controls and safe operation.
Steps to take before starting the snow blower, including area inspection and personal readiness.
Procedures for maintaining and storing the snow blower to ensure longevity and safety.
Information about extended maintenance service plans.
Outlines the user's duties in operating and maintaining the snow blower.
Details the warranty coverage and duration for the snow blower.
Specifies the warranty period for commercial or rental applications.
Lists items and conditions excluded from the warranty coverage.
Lists the tools needed for assembling the snow blower.
Identifies the items included in the snow blower's shipping carton.
Details the components found within the parts bag for assembly.
Step-by-step instructions for removing the snow blower from its packaging.
Instructions for assembling and positioning the snow blower's discharge chute.
Steps for attaching and connecting the upper handle and crank assembly.
Guidance on reconnecting control cable springs to the motor mount.
Instructions for installing and adjusting the speed select lever mechanism.
Steps for installing the remote chute control knob.
Identifies and explains the function of all engine and snow blower controls.
Detailed instructions on how to operate the snow blower effectively and safely.
Explanation of how to use the wheel lock-out pin for different maneuverability settings.
Essential checks and procedures to perform before starting the engine.
Steps to take before shutting down the engine to prevent potential issues.
Step-by-step guide for starting the snow blower's engine using the recoil starter.
Specific instructions for starting a cold engine with the recoil starter.
Specific instructions for starting a warm engine with the recoil starter.
Safety precautions and instructions for using the electric starter.
Instructions for starting a cold engine using the electric starter.
Instructions for starting a warm engine using the electric starter.
Advice and best practices for optimizing snow blower performance and usage.
Recommended maintenance checks and cleaning procedures after each snow blowing session.
Specific adjustments and maintenance for the snow blower itself.
Maintenance tasks that need to be performed based on usage or specific conditions.
Lubrication instructions for the auger gear box.
Lubrication procedures for storing the snow blower.
Instructions for lubricating hex shafts and chains for storage.
Lubrication schedule and procedures for the disc drive plate and other components.
Guidance on checking and changing engine oil, including recommendations.
How to adjust the auger housing height for proper snow clearing.
Procedure for adjusting the scraper bar for optimal performance.
Instructions on adjusting the skid height for different snow conditions.
How to adjust the drive belts for proper tension and operation.
Information regarding the traction drive belt and when to replace it.
Guidance on checking and adjusting the auger drive belt.
Step-by-step instructions for replacing the drive belts.
Detailed steps for replacing the auger drive belt.
Detailed steps for replacing the traction drive belt.
How to adjust the belt guides for proper belt tracking.
Procedures for adjusting the control cables for traction and auger drive.
How to properly adjust the friction wheel for speed control.
Step-by-step guide for replacing the friction wheel.
Instructions for replacing the auger shear bolts for safety.
How to clean, gap, and replace the spark plug.
Comprehensive guide for preparing the snow blower for long-term storage.
Information on how to identify your snow blower using model and serial numbers.
Exploded view and part numbers for the engine components.
Exploded view and part numbers for drive components and motor mount.
Exploded view and part numbers for the snow blower frame.
Exploded view and part numbers for the gear case.
Exploded view and part numbers for the auger housing assembly.
Exploded view and part numbers for the discharge chute.
Exploded view and part numbers for the snow blower wheels.
Exploded view and part numbers for the headlight assembly.
Exploded view and part numbers for the snow blower handle assembly.
Exploded view and part numbers for the control panel components.
Exploded view and part numbers for the electric starter system.
Exploded view and part numbers for the chute control rod assembly.
Exploded view and part numbers for the remote chute control mechanism.
Exploded view and part numbers for various decals and labels.
Exploded views and part numbers for the Tecumseh engine.
Location and importance of the blower model identification decal.
Location and importance of the engine model identification decal.
Information on how to contact Sears for service calls or to order replacement parts.
