To Next PageTo Next Page
Need help?Do you have a question about the Craftsman C459-52832 and is the answer not in the manual?
General| Engine Displacement | 208 cc |
|---|---|
| Stages | 2 |
| Drive Type | Self-propelled |
| Engine Type | 4-cycle |
| Intake Height (in) | 21 |
| Number of Forward Speeds | 6 |
| Number of Reverse Speeds | 2 |
| Electric Start | Yes |
| Chute Control | Remote |
| Auger Material | Steel |
| Skid Shoes | Yes |
Section to record the product's model and serial number.
Guidance on understanding and operating the machine safely.
Steps to take before operating the snow thrower.
Precautions for handling gasoline to prevent injury or damage.
Information on positioning and adjusting skid shoes for different surfaces.
Instructions on checking and adjusting tire pressure before operation.
Location for storing spare shear pins.
Description and location of the tool for clearing the chute.
Details on the shift lever for controlling direction and speed.
How to use the primer for cold-weather starting.
Instructions for checking and adding engine oil.
How to use the safety key to prevent unauthorized use.
Function of the rocker switch for stopping the engine.
How to engage and disengage the augers.
Controls for changing the snow discharge direction and angle.
How the drive control engages wheels and locks augers.
Explanation of auger function when engaged.
Adjusting skid shoes for surface conditions.
How to use controls for turning the unit.
Step-by-step guide to using the clean-out tool.
Information on the snow thrower's headlight.
Instructions for filling fuel and oil.
Step-by-step guide to starting the engine.
Instructions for using the electric starter.
How to start the engine using the recoil starter.
Procedures for safely shutting down the engine.
Steps to engage the drive system and move the snow thrower.
How to engage augers and start snow throwing.
Procedure to test and adjust the auger control cable.
General advice for operating the snow thrower.
Adjusting the shift cable for proper speed range.
Adjusting chute control cables for proper rotation.
Adjusting drive control and shift lever linkage.
Adjusting skid shoe height for terrain.
Refers to adjusting the auger control on page 11.
Maintenance instructions specific to the engine.
Procedures for lubricating various parts of the snow thrower.
Instructions for lubricating the gear shaft.
Maintenance for the wheels, including lubrication.
Lubrication and inspection of the auger shaft.
Information on shear pins and auger function.
Checking and replacing wear components.
Steps for removing and replacing skid shoes.
Steps for removing and replacing the shave plate.
Procedure for replacing the auger belt.
Steps to replace the drive belt.
How to inspect the friction wheel for wear.
Guidelines for storing the snow thrower during the off-season.
