To Next PageTo Next Page
Need help?Do you have a question about the Craftsman C459-52927 and is the answer not in the manual?
General| Clearing Width | 24 in |
|---|---|
| Engine Displacement | 208 cc |
| Auger Material | Steel |
| Type | Two Stage |
| Engine Type | 4-Cycle |
| Starter Type | Recoil |
Learn machine operation and safety practices before use.
Inspect the area and prepare the machine for safe operation.
Precautions for safely fueling the snow thrower with gasoline.
Safe procedure to unclog the snow chute using the clean-out tool.
Steps to assemble the snow thrower's chute mechanism and controls.
Locating and using the tool to clear the chute assembly.
Adjusting skid shoes for different surface conditions and snow removal depth.
Checking and adjusting tire pressure for safe operation.
How to use the gear shift lever for speed and direction control.
Engaging and disengaging the auger for snow throwing action.
Operating the drive control and its lock function for continuous auger engagement.
Adjusting the chute's direction and angle for snow discharge.
Step-by-step guide to start the snow thrower engine using recoil or electric starter.
Procedures for safely shutting down the engine after use.
Adjusting the shift cable for proper speed engagement and range.
Adjusting the chute control rod for proper movement and alignment.
Adjusting the drive control and shift lever linkage for smooth operation.
Adjusting skid shoes for proper ground clearance during snow removal.
General engine maintenance, including oil checks and lubrication.
Lubricating key components like gear shafts, auger shafts, and bearings.
Procedure for removing and replacing the auger drive belt.
Procedure for removing and replacing the main drive belt.
Preparing the snow thrower for storage to prevent damage.
