To Next PageTo Next Page
Need help?Do you have a question about the Craftsman CMCS505 and is the answer not in the manual?
General| Model | CMCS505 |
|---|---|
| Category | Saw |
| Power Source | Battery |
| Voltage | 20V |
| Spindle Lock | Yes |
| Blade Location | Right |
| Dust Port | Yes |
| Depth of Cut at 45 degrees | 1.9 inches |
| Amps | 15 Amp |
Ensures a clean, well-lit work area and keeping children and bystanders away.
Details how to avoid electrical hazards like using proper plugs and avoiding wet conditions.
Advises on staying alert, using PPE, preventing unintentional starts, and dressing properly.
Guidance on safe cutting techniques, blade alignment, and workpiece support.
Ensures proper operation of the lower blade guard for user protection.
Covers important safety notes like wearing eye protection and potential chemical exposure.
Specifies the maximum depth of cut for the circular saw.
Step-by-step instructions for safely installing and replacing the saw blade.
Details how sagging or improperly supported workpieces can lead to kickback.
Explains how incorrect depth settings can increase the risk of pinching and kickback.
Identifies factors that cause blade twisting and how they contribute to kickback.
Lists materials like wet or green lumber that need special care to prevent kickback.
Explains how dull blades increase load, friction, and the risk of binding and kickback.
Highlights how bevel cuts require special attention to technique to avoid kickback.
Guidance on safely restarting a cut when the blade is jammed in the material.
Step-by-step guide on inserting and removing the battery pack from the tool.
Illustrates the correct and safe way to hold the saw for optimal control and safety.
Guidance on securely supporting workpieces to prevent loss of control and injury.
Instructions on proper cutting methods, including shoe placement and clamping work.
Instructions for cleaning air vents and the tool's exterior to ensure proper operation and longevity.
Information on using CRAFTSMAN recommended accessories for safety and performance.
Guidance on when and how to get the tool serviced by authorized centers.
Instructions and benefits of registering the product online for warranty and safety notifications.
