To Next PageTo Next Page
Need help?Do you have a question about the Craftsman CMCS4000 and is the answer not in the manual?
General| Type | Circular Saw |
|---|---|
| Motor | Brushless |
| Battery Compatibility | 20V MAX |
| Voltage | 20V |
| Blade Diameter | 7-1/4 inches |
| Power Source | Battery |
| Arbor Size | 5/8 in |
Specifies safety precautions unique to the operation of a wet tile saw.
Details essential safety warnings and instructions for handling and charging battery packs.
Describes the step-by-step process for charging a battery pack correctly.
General operational warnings and notes before using the tool.
Details the correct procedure for installing and removing the battery pack.
Explains how to attach the edge guide for accurate cuts at different angles.
Advises on the correct placement of the saw on a stable surface for operation.
Explains how to operate the on/off switch and the safety lock feature.
Guides the user on how to make a cut on a tile using the wet tile saw.
Describes the procedure for locking the cutting cart into position.
Covers different types of cuts, including straight cuts and diagonal cuts.
Explains how to perform L-cuts on tiles for specific fitting needs.
Guides on how to ensure the cutting cart fence is at a 90° angle to the blade.
Explains how to adjust the cutting cart to be parallel with the saw blade.
Details the cleaning process for the tool, including air vents and water reservoir.
Provides information on tool lubrication and recommended service intervals.
Specifies the types of blades (ceramic wheel, porcelain wheel) compatible with the saw.
Explains that chargers and battery packs are not serviceable and directs users to authorized centers.
Encourages product registration for warranty service, ownership confirmation, and safety notifications.
Summarizes the terms of the Craftsman limited warranty, including coverage and exclusions.
