To Next PageTo Next Page
Need help?Do you have a question about the Craftsman CMCVH001 and is the answer not in the manual?
General| Brand | Craftsman |
|---|---|
| Model | CMCVH001 |
| Category | Vacuum Cleaner |
| Language | English |
Explains safety alert symbols and words used in the manual for hazard communication.
Ensure the switch is off before handling to prevent accidental starts.
Remove the battery before adjustments or storage for safety.
Use only the manufacturer's charger to avoid fire risk.
Using other battery packs may create injury and fire risk.
Avoid shorting terminals to prevent burns or fire.
Avoid contact with ejected battery liquid; flush with water.
Damaged units may exhibit unpredictable behavior, risking fire or explosion.
Exposure to high temperatures may cause explosion.
Charge within specified temperature ranges to prevent damage and fire risk.
Ensure safety and reliability by using identical replacement parts.
Only perform repairs indicated in the instructions.
Modifications can lead to personal injury or damage.
Protect eyes with certified safety equipment during use.
Some dust contains chemicals; work in ventilated areas with safety equipment.
Protect skin from dust absorption by wearing clothing and washing.
Remove dust to avoid contaminating the environment or increasing health risks.
Use clamps for stability to prevent loss of control and injury.
Air vents may cover moving parts; avoid them to prevent entanglement.
Store the tool on a stable surface to prevent tripping hazards.
Follow warnings for battery packs and chargers to prevent injury or fire.
Avoid charging/using in explosive environments due to ignition risk.
Do not modify packs to fit incompatible chargers; risk of rupture.
Use only designated chargers for safety and compatibility.
Prevent liquid entry into battery packs to avoid damage or hazards.
Avoid extreme temperatures for optimal battery life and safety.
Battery packs can explode in fire; avoid incineration.
If battery liquid contacts skin, wash with soap and water.
Provide fresh air if battery contents cause respiratory irritation.
Battery liquid is flammable if exposed to spark or flame.
Do not open or use damaged battery packs; return for recycling.
Store in a cool, dry place away from direct sunlight and excess heat.
Clean exterior with a cloth or soft brush; do not use water.
Explains how to read the fuel gauge for battery charge level.
Handle battery packs carefully during transport to prevent short circuits.
Protect terminals to prevent contact with metal objects and short circuits.
Use only CRAFTSMAN chargers as others may cause overheating or bursting.
Using other battery packs may cause hazards like fire or electric shock.
Protect the charger from moisture to prevent electric shock.
Disconnect charger by the plug to prevent damage to the cord or plug.
Position cord safely to avoid damage, stress, or tripping hazards.
Use properly sized extension cords to avoid fire or electric shock risks.
Outdoor cords reduce electric shock risk when operating outside.
Use correct gauge extension cords to prevent voltage drop and overheating.
Avoid blocking vents to prevent excessive internal heat and potential damage.
Position charger away from heat to ensure proper operation and safety.
Have damaged cords or plugs replaced immediately.
Take damaged chargers to an authorized service center.
Service or repair chargers only at authorized centers to avoid shock hazards.
Use the charger only with the specified voltage (120V).
Prevent conductive materials from contacting charger parts to avoid shorts.
Unplug the charger when not in use to save energy and prevent hazards.
Details the steps for charging a battery pack using the indicator lights.
Explains the delay feature for charging batteries at extreme temperatures.
Never use the cordless hand vacuum without its filters.
Ensure filter and pre-filter are correctly positioned before use.
Instructions for inserting and removing the battery pack for operation.
Instructions on how to operate the on/off switch for the vacuum.
Blow dirt and dust out of air vents weekly with dry air and eye protection.
Maximum dust collection requires clean filters and an empty, cleanable dust bowl.
Clean the exterior of the motor section with a damp, soapy cloth; do not immerse.
Remove, shake, and wash filters and pre-filters for better performance.
Only CRAFTSMAN recommended accessories should be used with this product.
The crevice tool slides into the on board storage underneath the motor housing.
Safety warnings for using the VersaTrack system for hanging the tool.
Repairs, maintenance, and adjustments should be performed by a CRAFTSMAN service center.
Register for efficient warranty service and proof of ownership.
Registration allows contact in case of required safety notifications.
Covers defects due to faulty materials/workmanship for three years (batteries two years).
Does not cover normal wear, tool abuse, or unauthorized repairs.
Explains specific legal rights and potential limitations on implied warranties.
Provides free service periods for specific CRAFTSMAN battery pack models.
Warranty is void if battery pack is tampered with; fraud may be prosecuted.
Offers a full refund within 90 days of purchase if not completely satisfied.
Contact CRAFTSMAN for free replacement of illegible or missing warning labels.
