Craftsman CMXPTSG1010NB User Manual

9
ENGLISH
NOTICE: Working pressure is the amount
of air pressure the tool sees when
operating.
NOTICE: Always be cautious of your hands
and finger placement while tool is running.
Always disconnect air supply when not in
use to prevent accidental firing of the tool.
OPERATING
DISASSEMBLY
6. Connect the air hose to the male plug.
Set the working pressure at 90 PSI for
best tool performance.
1. To remove the chisel , hold onto the
bottom hook on the retaining spring
and turn the spring counterclockwise
or you can insert a screwdriver into the
hook to help turn the spring.
2. Refer to assembly instructions to install
a different chisel .
1. Press the trigger to start the tool.
2
4
Top
hook
Bottom
hook
Counterclockwise
3
3
3
4
2

Craftsman CMXPTSG1010NB Specifications

General

Brand	Craftsman
Model	CMXPTSG1010NB
Category	Tools
Language	English