To Next PageTo Next Page
Need help?Do you have a question about the Craftsman EZ3 917.259172 and is the answer not in the manual?
General| Engine Brand | Briggs & Stratton |
|---|---|
| Engine Torque | 6.75 ft-lbs |
| Displacement | 190cc |
| Starting System | Recoil Start |
| Mulching Capability | Yes |
| Side Discharge | Yes |
| Rear Bagging | Yes |
| Wheel Size (Rear) | 8 inches |
| Engine Type | 4-cycle |
| Engine Displacement | 190cc |
| Cutting Height Positions | 6 |
| Speed | Variable |
| Oil Capacity | 20 oz |
| Cutting Width | 22 inches |
| Wheel Size (Front) | 8 inches |
| Cutting Height | 1.25 - 3.75 in |
Guidelines for safe operation of ride-on mowers, including clearing the area and proper handling.
Precautions for operating the mower on slopes to prevent loss of control and tip-over accidents.
Ensuring children are kept away from the mowing area and operator's attention.
Detailed steps for starting the engine, including warm and cold weather conditions.
Instructions for purging the hydrostatic transmission before first use or after servicing.
A tabular guide for regular service and maintenance tasks based on operating hours.
Diagnosing and correcting common causes for the engine failing to start.
Identifying reasons for reduced engine power and solutions.
Visual guide for safely operating the tractor on slopes up to 15 degrees.
