To Next PageTo Next Page
Need help?Do you have a question about the Craftsman EZ3 917.259556 and is the answer not in the manual?
General| Engine Brand | Briggs & Stratton |
|---|---|
| Engine Displacement | 140cc |
| Oil Capacity | 20 oz |
| Engine Type | 4-Cycle |
| Cutting Width | 21 inches |
| Warranty | 2 year limited |
Key safety practices for operating the tractor to prevent injury.
Precautions for safe operation on slopes to prevent tip-overs.
Guidelines to prevent accidents involving children and safety during service.
Details on engine, fuel capacity, oil type, tire pressure, and charging system.
Operator's duties for safe operation and maintenance.
Information on two-year riding equipment and 90-day battery warranty.
Parts and fluids for engine care and general tractor maintenance.
Various attachments to improve tractor functionality and lawn care.
Visual inventory of hardware parts shown at actual size.
Components packed in the carton, like seat and steering wheel.
Inventory of smaller hardware parts not shown at actual size.
Required tools, unpacking steps, and steering wheel/shaft assembly.
Procedures for safely removing the tractor from skid and connecting the battery.
Steps for installing and adjusting the tractor seat for comfort.
Verifying tire pressure, mower deck levelness, belts, and brake system.
Attaching gauge wheels to the mower deck for proper cutting height.
Instructions for attaching the mulcher plate to the mower deck.
Steps to switch between mulching, bagging, or discharging.
Essential checks before operating the tractor for the first time.
Functions of attachment clutch, lift lever, and light switch.
Descriptions of motion control, parking brake, and throttle/choke.
Details on freewheel control, ammeter, and height indicator.
Procedure for engaging the parking brake.
Steps to safely stop the tractor and disengage mower blades.
How to operate throttle, motion controls, and adjust mower height.
How to operate the mower and safely handle slopes.
Procedures for transporting the tractor and checking engine oil.
Instructions for safely adding fuel, including warnings.
Steps for starting the engine in various weather conditions.
Procedures for warming up and purging the hydrostatic transmission.
Advice for effective mowing, including discharge and cutting tall grass.
Tips for optimal mulching, including blade cleaning and cutting height.
Recommended service intervals for tractor and engine components.
Guide to lubricating tractor parts and general care recommendations.
Procedures for checking brakes, tires, and maintaining mower blades.
Care for the battery, V-belts, and transaxle cooling system.
Keeping air intake components clean for engine performance.
Procedure for replacing the engine oil filter.
Maintenance for the air cleaner's pre-cleaner and paper cartridge.
Inspection and replacement of muffler, spark plugs, and fuel filter.
Guidelines for cleaning the tractor's exterior and components.
Critical safety steps before performing any service or adjustments.
Step-by-step instructions for detaching and reattaching the mower deck.
Adjusting the mower deck for even side-to-side cutting.
Adjusting the mower deck for optimal front-to-back cutting.
Instructions for replacing the mower blade drive belt.
How to adjust the brake for proper stopping distance.
Procedure for replacing the motion drive belt.
Fine-tuning the motion control lever for proper operation.
Adjusting steering alignment and understanding front wheel limitations.
Steps for removing wheels for tire repair or other service.
Procedures for jump-starting the tractor using jumper cables.
Replacing headlight bulbs, fuses, and checking wiring integrity.
Instructions for removing the tractor's hood and grill assembly.
Fine-tuning the throttle control cable for correct operation.
Adjusting idle speed and fuel mixture for optimal engine performance.
Steps for cleaning, lubricating, and securing the tractor for storage.
Procedures for storing the battery and preparing the fuel system.
Steps for storing the engine, including oil and cylinders.
Causes and corrections for engine not starting or starting with difficulty.
Diagnosing issues when the engine won't crank or just clicks.
Troubleshooting causes for reduced power and excessive vibration.
Troubleshooting operator presence control and poor cut quality.
Diagnosing issues with mower blades not rotating or poor grass discharge.
Troubleshooting headlights, drive loss, and engine backfire.
Table detailing circuits activated by ignition switch positions.
Important notes on using insulated clips for securing wiring.
Illustrated breakdown of the tractor's electrical system parts.
Detailed list of electrical parts with their corresponding numbers and descriptions.
Exploded view of the tractor's chassis and related parts.
Detailed list of chassis and enclosure parts with numbers.
Exploded views of the tractor's drive system components.
Detailed list of drive system parts with their corresponding numbers.
Exploded views of the tractor's steering system components.
Detailed list of steering system parts with their corresponding numbers.
Exploded views of the tractor's seat assembly components.
Diagrams and part numbers for tractor decals.
Illustrations and part numbers for tractor wheels and tires.
Exploded views of various engine components like intake and controls.
Detailed list of engine parts with their corresponding numbers and descriptions.
Exploded views of the tractor's mower lift components.
Detailed list of mower lift parts with their corresponding numbers.
Exploded views of the tractor's mower deck components.
Detailed list of mower deck parts with their corresponding numbers.
Exploded views of the Hydro Gear transaxle components.
Detailed list of Hydro Gear transaxle parts with their corresponding numbers.
Exploded views of engine air intake and blower housing parts.
Diagrams for engine controls, exhaust system, and crankshaft.
Part numbers for engine air intake and blower housing components.
Part numbers for engine controls, exhaust, and crankshaft.
Exploded views of the engine's fuel system parts.
Diagrams for the engine's cylinder head, valve, and breather.
Detailed list of fuel system parts with their corresponding numbers.
Part numbers for cylinder head, valve, and breather components.
Exploded views of engine ignition, electrical, and oil pan components.
Diagrams for the engine's crankcase and starting system.
Part numbers for engine ignition, electrical, crankcase, and oil pan.
Part numbers for the engine's starting system components.
Visual guide and explanation of safe slope operating limits (15° max).
Instructions to ride up/down slopes, not across, and make gradual turns.
Key details about the tractor's horsepower, mower size, and engine model.
Contact numbers for obtaining repair service and ordering replacement parts.
