To Next PageTo Next Page
Need help?Do you have a question about the Craftsman HYDROGLASS 390.2511 and is the answer not in the manual?
General| Brand | Craftsman |
|---|---|
| Model | HYDROGLASS 390.2511 |
| Category | Water Pump |
| Language | English |
Details electrical hazards, proper grounding, and wiring practices.
Covers freezing risks, pressure safety, work area, and motor heat precautions.
Explains the functions of the pump's tank and air volume control.
Details the function and settings of the pressure switch.
Describes the role of the impeller, jet, and pressure regulator.
Guidelines for using steel piping in pump installations.
Steps for installing the shallow well jet assembly.
Table showing recommended discharge pipe sizes based on distance.
Notes on pump installation with Captive Air Tanks.
Instructions for setting the motor voltage selector.
Guidance on connecting power supply wires and grounding.
Step-by-step guide for priming a shallow well pump.
Step-by-step guide for priming a deep well pump.
Information on lubrication requirements for the pump and motor.
Instructions for draining the pump and system for winter.
Steps for taking apart and reassembling the pump.
Procedure for removing the motor for repair or replacement.
Detailed steps for installing a new shaft seal.
Instructions for cleaning the pump impeller.
Steps to remove debris from the shallow well jet.
Steps to remove debris from the deep well jet.
Troubleshooting steps for leaks at metal clamps.
Data on pump output at various depths and pressures.
Diagram illustrating pump components with key numbers.
A detailed list of pump parts with model numbers.
Diagram of shallow well jet assembly parts.
List of parts for the shallow well jet assembly.
Details and parts for single pipe jet configurations.
Details and parts for double pipe jet configurations.
Diagram of vertical casing adapter components.
List of parts for vertical casing adapters.
