TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center
PROBLEM CAUSE CORRECTION
Loss of drive 1 Freewheel control in "disengaged" 1 Place freewheel control in
position. "engaged" position.
2 Motion drive belt worn, damaged, 2 Replace motion drive belt.
or broken.
3 Air trapped in transmission 3 Purge transmission.
during shipment or servicing.
Engine "backfires" 1 Engine throttle control not set 1 Move throttlecontrol between
when turning between half and full speed (fast) half and full speed (fast) position
engine "OFF" position before stopping engine, before stopping engine.
Engine dies when 1 Reverse operation system (ROS) 1 Turn ignition key to ROS "ON"
tractor is shifted is not "ON" while mower or other position. See Operation section.
attachment is engaged.
into reverse
ou [], [iad. the a.p,swez anti moze or_. maaagemySoIaeoCOm - ier free! I
o Find this and at[ your other product manuals onhne.
oGetanswersfromourteamofhomeexperts.
oGet a personatized maintenance ptan for your home.
Findinformation and tools to help with home projects.
anag÷ ho÷÷ I
brougattoyoubyso_rs
31
To Next Page
Loading...
Need help?
General
