To Next PageTo Next Page
Need help?Do you have a question about the Craftsman Z6800 and is the answer not in the manual?
General| Transmission | Hydrostatic |
|---|---|
| Blades | 3 |
| Cutting Height | 1.5-4 inches |
| Deck Material | Steel |
| Warranty | 3 years limited |
Proper procedures and precautions for towing the mower.
Guidelines for safe and effective operation of the mower.
General information and definitions for the operator's manual.
Regulations and safety for transporting the mower on public roads.
Information on obtaining quality service and support for Craftsman products.
Locating and identifying the machine and engine manufacturing numbers.
Essential safety guidelines to be read and followed before operating the machine.
Precautions to prevent accidents involving children and the mower.
Key principles and rules for operating the mower safely.
Recommended protective gear for safe operation of the mower.
Specific safety precautions and techniques for operating on slopes.
Procedures for safely storing and handling gasoline for the mower.
Guidelines for routine maintenance to ensure safe operation and longevity.
Instructions for safely loading, unloading, and securing the mower for transport.
Guidelines and warnings related to towing the mower or using it for towing.
Information about the spark arrestor's function and maintenance requirements.
How to control the mower's direction and speed using the motion control levers.
How to engage, disengage, and test the park brake system.
How to adjust engine speed and blade rotation using the throttle.
How to use the choke for cold engine starts.
How to engage and disengage the mower deck blades.
How to start, stop, and use accessory functions with the ignition switch.
Understanding the service meter for tracking operating hours and maintenance needs.
How to adjust the seat position for operator comfort and safety.
Location and type of the primary fuse.
How to adjust the mower deck cutting height.
How to operate the fuel shut off valve for fuel management.
Adjusting the mower for straight-line tracking.
How to engage/disengage hydro release levers for manual movement.
Information on fuel capacity, type, and safety precautions for refueling.
Guidance for new operators to become familiar with mower controls and handling.
Detailed instructions on controlling mower movement, turning, and zero-turn maneuvers.
Information on the automated maintenance dashboard and alert features.
Pre-operation checks and conditions required before starting the engine.
Step-by-step procedure for starting the mower's engine.
Procedures for operating the mower after the engine has started.
Steps to safely stop the mower's engine and shut down.
Safety guidelines and techniques for mowing on inclines.
Advice for achieving optimal mowing results and lawn care.
Instructions for manually pushing or pulling the mower.
A comprehensive schedule of required maintenance tasks and intervals.
Information on battery maintenance, charging, jumper cable use, and replacement.
How the machine's safety features prevent starting or operation under unsafe conditions.
How to visually inspect and test the park brake for proper function.
Information on blade sharpening, replacement, and torque specifications.
Recommended tire pressure for optimal performance and safety.
How to check and maintain caster wheels.
How to adjust anti-scalp rollers for proper deck height.
How to inspect and replace V-belts for proper operation.
Steps for removing and installing the mower deck belt.
How to level the mower deck for optimal cutting performance.
Procedures for cleaning the mower deck and other components.
Daily inspection of the machine for loose or missing hardware.
A schedule outlining lubrication points and frequency.
How to change the engine oil and filter.
Lubrication procedures for wheel bearings and deck spindles.
Information regarding the maintenance-free transmission.
Steps for preparing the machine for long-term storage, especially winter.
Recommendations for ordering parts and annual service checks.
Recommended torque values for various fasteners and components.
Checklist for initial delivery inspection and customer information.
Maintenance tasks to be performed after the first 10 hours of operation.
Routine checks and cleaning to be performed daily.
Maintenance tasks to be performed every 25 hours of operation.
Maintenance tasks to be performed every 50 hours of operation.
Maintenance tasks to be performed every 100 hours of operation.
Major maintenance tasks to be performed every 300 hours of operation.
Maintenance tasks to be performed at least once per year.
Terms, restrictions, and coverage for the limited and battery warranties.
Procedures for getting repair, replacement, or service under warranty.
