Craig CLC504e - Assembly The Stand; Antenna Connections

ASSEMBLY THE STAND
10 11
ANTENNA CONNECTIONS
to
2. Mount the stand to the Plastic Cylinder by the supplied small size screws
(3 x 10 PWB, Make sure the wide surface is on the panel side).
Plastic Cylinder
TV Stand
Supplied small size
screws (3 x 10 PWB)
Supplied big size
screws (4 x 12 PPH)
1. Mount the Plastic Cylinder to the TV by the supplied big size screws (4 x
12 PPH) and screwdriver as the figure below.