Craig CTFT712 - Features Setup - Preference Settings; TV Type, Audio, Subtitle, and Menu Language; Parental Control and Password Management

20
PREFERENCE SETUP
TV Type: Set or reset the color system to NTSC, PAL or Auto to match the color system of the
connected external TV.
Audio: To set or reset the priority audio language if available in the current playing DVD disc.
Subtitle: To set or reset the priority language of subtitle if available in the current playing DVD
disc.
Disc Menu: To set or reset the priority language of the menu if available in the current playing
DVD disc.
Parental: Set or reset the rate level as below:
When Parental was selected and highlighted, press the direction button to enter, the rate
level list as below will appear on the screen.
Press the Direction or buttons to select and highlight the desired level. Then press the
OK Button on the unit or the ENTER Button on the Remote Control to enter. Password window
will pop up on the screen.
Enter the password by presses the Numeric buttons then press OK Button on the unit or the
ENTER Button on the Remote Control to
confirm
.
(The default password is 7120)
Rate levels:
1 (KID SAF): Kidsafe
2 (G): All ages
3 (PG): Parental Guidance
4 (PG-13): Parental Guidance less than 13
years old
5 (PGR) : Under 17 years old, Parental
Guidance suggested
6 (R): Under 17 years old, Parental Guidance
strongly
7 (NC-17): 17 years old and above
8 (ADULT): Adult only
Password Mode: To turn ON/OFF password
mode (Rate mode).
Password: Change the password as below:
Password: When Password is selected and highlighted, press the Direction button to enter.
~
~
~
~
~
When selected and highlighted, “Change” will
appear, press the direction button to enter.
Press the OK button to confirm, the setting
menu will pop up.
Enter the Old Password by press the numeric
buttons.
Enter the new Password the reconfirm the new
password as the on screen instructions
Select and highlight the OK button on the screen
then press the OK button to save the new
password and exit.
A.
B.
C.
D.
E.
Default: To reset all the settings back to factory default set.
Note: The color system of the TV in US, Canada and Mexico is NTSC.
NOTE: If forgot the passwords, using the default password 7120 to reset a new password.