OPERATIONS
POWER
VOL ( Volume +/–
Press to increase or decrease volume.
MUTE
GOTO
PBC
Press to turn to standby mode. Press again to turn on.
LCD ON/OFF
Press to turn on or off the LCD display.
OSD
SUBTITLE
ANGLE
1. Turn on the player and place the disc into the player as previous procedures.
2. Use the Direction Buttons to select and highlight the desired folder then press the ENTER button to enter. The file
list will appear on the screen.
3. Using the Direction Buttons to select and highlight the desired file then press the ENTER or
Repeat:
During playback, press the REPEAT Button repeatedly to select:
~ Repeat One: Play the current track repeatedly.
~ Repeat Folder:
Play the tracks in the current folder repeatedly.
Notes:
1. Disc loading period of the JEPG/MP3 discs may be longer than loading DVD disc.
2. Other operation is similar to CD disc playing.
IMPORTANT NOTES:
Some discs may take a few seconds to load. If a disc is inserted incorrectly, dirty, damaged, or is not present at
all, “NO Disc” or “Bad Disc” will appear in the display.
Always hold the disc without touching either of its surfaces. When inserting a disc, position it with the printed title
side facing up, align it with the guides and place it in its proper position.
It is important that you read the manual that accompanies the DVD disc as there are features that are on this
DVD player that cannot be used with certain DVDs. There are also extra features that are different for each DVD
disc, so they are not explained in this owner’s manual.
Play/Pause Button
Playback of a JPEG (PICTURE ) MP3 disc:
The folder/files list will appear on the screen.
to start playback.
Press to turn off the sound, press again to resume.
~ To select the desired Title and Chapter, press the
GOTO Button once, the Title and Chapter selection
menu will appear on the screen. Use the Direction
and Numeric Buttons to select the desired title and
chapter then press the ENTER Button to start
playback.
~ Select the desired establish time by Chapter to play,
press the GOTO Button three times, the time
selection table appear on the screen. Using the
CONTROLS:
( Function depends on the recording of
During DVD playback, press repeatedly to select the
viewing angle
disc ).
During DVD playback, press repeatedly to select the
desired subtitle ( Function depends on the recording
of disc ).
( Function operation in VCD 2.0 disc playback only ).
Press to turn PBC (Playback Control) On or Off.
(On Screen Display)
During playback, press the OSD button repeatedly to
read the information of playback status.
-14-
~ Folder: Normal playback.
~ Select the desired establish time by Title to play,
press the GOTO Button twice, the time selection
table appear on the screen. Using the Direction and
Numeric Buttons to enter the desired establish time.
Direction and Numeric Buttons to
enter the desired
establish time. The unit will start plays the movie
from the selected establish time.
The unit will start plays the movie from the selected
establish time.
TITLE
MENU
AUDIO
of the disc).
Press to return to disc's title page (Function depends
on the recording
depends on the recording of the disc).
Press to return to disc's menu page (Function
During DVD playback, press repeatedly to select the
desired language
(Function depends on the recording
of disc).
To Next Page
Loading...