EasyManua.ls Logo

Cramer 82HD61 - TRANSPORTATION AND STORAGE; TROUBLESHOOTING; TECHNICAL DATA

Cramer 82HD61
168 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7 TROUBLESHOOTING
Problem Possible cause Solution
The motor does
not start when
you pull the trig-
ger.
The battery pack
is not installed
tightly.
Make sure that
you tightly install
the battery pack
in the machine.
The battery pack
is out of power.
Charge the bat-
tery pack.
The machine
smokes during
operation.
The machine
has damage.
1. Immediately
stop the ma-
chine.
2. Remove the
battery pack.
3. Contact a
service cen-
ter.
There is too
much noise
and/or vibration
during operation.
The parts are
loose.
1. Stop the ma-
chine.
2. Remove the
battery.
3. Inspect for
damage.
4. Check and
tighten loose
parts.
The parts have
damage.
Do not use the
machine and
contact a service
center.
The blades are
lacking lubrica-
tion.
Follow section
5.3 to lubricate
the blade.
The gearbox is
lacking grease.
Follow section
5.2 to check and
grease the gear-
box.
8 TECHNICAL DATA
Voltage 82V
No load speed 4000/5000 (±10%) min
-1
Blade speed 4000/5000 (±10%) min
-1
Blade length 610 mm
Cutting capacity 30 mm
Weight (without
battery pack)
3.55 kg
Measuered sound
pressure level
87 dB(A), K
PA
=3 dB(A)
Guaranteed sound
power level
98 dB(A)
Vibration 4.7 m/s
2
Uncertainty 1.5 m/s
2
Battery model 82V180, 82V290P, 82V360,
82V580P and other BAB series
Charger model 82C1G, 82C2, 82C6 and other
CAB series
IPX IPX5
9 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name: GLOBGRO AB
Globe Group Europe
Address: Riggaregatan 53, 211 13 Malmö , Sweden
Name and address of the person authorised to compile
the technical file:
Name: Ralf Pankalla
Address: Riggaregatan 53, 211 13 Malmö , Sweden
Herewith we declare that the product
Category:
Cordless Hedge Trimmer
Model: 82HD61 (HTB44800)
Serial number: See product rating label
Year of Construc-
tion:
See product rating label
is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC
is in conformity with the provisions of the following
other directives:
Electromagnetic Compatibility - Directive
2014/30/EU
Restriction of the Use of certain Hazardous
Substances in Electrical and Electronic
Equipment (RoHS) Directive 2011/65/EU & (EU)
2015/863
Outdoor Noise Directive 2000/14/EC &
2005/88/EC
Furthermore, we declare that the following standards
have been used:
EN 62841-1; EN 62841-4-2; EN IEC 55014-1;
EN IEC 55014-2; EN 62233; EN ISO 3744; ISO
11094; IEC 62321-3-1; IEC 62321-4; IEC 62321-5;
7
English
EN

Related product manuals