Name: Cramer 40T05
Brand: Cramer
Rating: 4 (1 reviews)

Questions and Answers:

jdennisAug 3, 2025

What to do if my Cramer Trimmer motor fails to start when I depress the switch trigger?

C
Carrie ClarkAug 3, 2025
If the motor of your Cramer Trimmer fails to start when the switch trigger is depressed, there are a couple of things to check: * First, ensure the battery is secure by making sure the latch on the bottom of the battery pack snaps into place. * Second, verify the battery is charged. If not, charge the battery pack according to the instructions included with your model.

Frederick SandersAug 13, 2025

Why won't the string advance on my Cramer 40T05 Trimmer bump-feed head?

A
Allison SmithAug 14, 2025
If the string won't advance when using the bump-feed head on your Cramer Trimmer, it could be due to several reasons: 1. The string may be welded to itself, in which case you should lubricate it with silicone spray. 2. There might not be enough string on the spool. Install more string. 3. The string could be worn too short. Pull the string while pressing the line release button. 4. The string could be tangled on the spool. Remove the string from the spool and rewind it.

Brand

Model

40T05

Cramer 40T05 User Manual

Questions and Answers: