Cramer 40T05 - CUTTING TIPS; ADVANCING CUTTING LINE; LINE CUT-OFF BLADE; CONVERTING TRIMMER TO EDGER

English (original instructions)
WARNING
Noise. A degree of noise from the machine is not

        

     

be worn;


       
       

      
users should monitor closely the condition of their hands

WARNING
     

CUTTING TIPS See Figure 7.
 
is the best cutting area.
 The trimmer will cut better when moved from left to
right across the area to be cut; it is less effective when
moved from right to left.
 
force cutting head into uncut grass.
 


        

cutting line.
ADVANCING CUTTING LINE
        
gets worn down and becomes shorter. This trimmer
       

ground while rotating. The cutting blade will cut the line to

LINE CUT-OFF BLADE

        
       
line whenever you hear the engine running faster than



CONVERTING TRIMMER TO EDGER See Figure 8.
 
 
 Rotate control handle (2) 90° until it engages.
 
WARNING
      
  

WARNING
       

any maintenance.
GENERAL MAINTENANCE


         


       

commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING


     
       
injury.
          
      

WARNING
       

any maintenance.
3