English (original instructions)
SPOOL REPLACEMENT See Figure 9.
the cutting line is extended from the slots of the coil
align with the eyelet in the cutting head. Thread the
cutting line into the eyelets.
CUTTING LINE REPLACEMENT See Figures 10.
Position the lines in the guide slots.
end of the cutting line is extended from the slots of the
ends of the lines through the line exit holes in the sides
of the trimmer head.
Reinstall the cover onto the trimmer head. Push until
STORING THE TRIMMER
storing.
Store and charge your batteries in a cool area.
All batteries gradually lose their charge. The higher the
it, recharge the batteries every month or two. This
of guards on cutting attachments with metal blades.
storage.
ENVIRONMENTAL PROTECTION
for the benefit of both social coexistence and the
environment in which we live. Try not to cause any
disturbance to the surrounding area.
centres where the material will be recycled.
environment with the machine, but hand it over to a
force.
To Next Page
Loading...
