5
2. Setting Up the Target for Play
A. Once the Target Frame is assembled, place it on a flat surface, rotate the 4
Legs down and Lock the Locking Leg Connectors by sliding the Connectors
into the Locking Elbows, see FIG. 2.
1-877-472-4296
AFTER SALES SUPPORT
6510
gsskatina@gmail.com
On soft ground,
Insert the Ground
Stakes into all 4 Legs
8
Swing All Legs Down 90°
and Slide the Locking Leg
Connectors into the
Locking Elbows
Note: To store the Target,
simply remove the Ground
Stakes, slide the Leg
Connectors away from the
Elbows to unlock the Legs
and swing all 4 Legs up.
FIG. 2
To Next Page
Loading...
