EasyManua.ls Logo

Crane 9065 - Step-by-Step Assembly; Care and Maintenance Instructions; Pre-Use Inspection Guidelines; Cleaning and Storage

Crane 9065
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AFTER SALES SUPPORT
service@801service.net
5
36” Fitness Trampoline Care and Maintenance Instructions
1 866 558 8096
AFTER SALES SUPPORT
4
36” Fitness Trampoline
service@801service.net
1 866 558 8096
Instrucons
1. Remove the pre-assembled main jumping area of the trampoline from
the packaging. The pre-assembled unit consists of the protecve pad
(1), the mat (2), and the frame (3).
2. Remove the protecve caps from the 6 legs (4) of the trampoline.
3. Screw the legs (4) rmly into the appropriate slots on the boom of
the frame (3).
4. Periodically inspect the base, feet (5), clamps (6), and tension springs
(7).
Care and Maintenance Instrucons
Inspect the trampoline before each use and replace any worn, defecve,
or missing parts. The following condions could represent potenal
hazards:
1. Missing, improperly posioned, or insecurely aached frame padding.
2. Punctures, frays, tears, or holes worn in the bed or frame padding.
3. Deterioraon in the stching or fabric of the bed or frame padding.
4. Ruptured springs.
5. A sagging bed.
6. Sharp protrusions on the frame or suspension system.
7. Broken or missing suspension elements or suspension elements
disconnected to the bed edge.
8. A bent or broken frame, or sharp protrusions on the frame.
STORE THE PRODUCT IN A SAFE PLACE WHERE IT CANNOT GET
DAMAGED. USE A DRY OR DAMP CLOTH TO CLEAN THE PRODUCT. DO
NOT USE SPECIAL CLEANING AGENTS TO CLEAN THE TRAMPOLINE.
Assembly and Installation Instructions

Related product manuals