Crane DISC GOLF SET - Frame and Pole Assembly

4. Slide Large Poles (#3) through the mesh pocket sleeves (#10), then insert the
Large Poles (#3) into the 4 Way Connectors (#P3). (See FIG. 3A and 3B.)
5. Next insert the Leg (#1) into the top Joint of FIG. 1A Assembly. (See FIG. 3C.)
Repeat for all 3 legs.
NOTE: Make sure that all Connectors are correct.
6. Turn over the FIG. 3 Assembly. (See FIG. 4.）
FIG. 3
FIG. 4
Disc Golf Set Assembly
AFTER SALES SUPPORT 5
mmdservice@themdsports.com
1-877-852-8164
FIG. 3A
3
3
FIG. 3B
3
10
FIG. 3C
1
FIG. 1A Assembly
P3