OPERATION & USE
HEATER SETTINGS
PLEASE NOTE: Regardless of the type of heating system setup, always install and maintain
at least one smoke detector in good working condition on each floor of your home.
Periodically check and/or replace the battery in your smoke detector with a fresh battery.
MAINTENANCE
CAUTION: Always be sure the heater is switched OFF, unplugged and completely
cooled before cleaning or attempting to store the item. Do NOT immerse heater in
water or allow water to drip into the interior of the heater, as this could create an
electric shock hazard.
CLEANING
Allow product to completely cool before handling, cleaning or storing.
1. Ensure the control knob is in the off position and power cord is unplugged.
2. Clean the outside of the heater with a damp cloth & buff with a dry cloth.
3. DO NOT use any detergents or abrasives. DO NOT allow any water to enter the
heater.
4. Clean the filter by removing the back net cover and then the filter. Rinse the filter in
warm water and allow it to dry. Once completely dry, reinstall the filter and replace
the cover.
5. The fan motor has been lubricated at the factory and requires no additional
lubrication for the life of the product.
STORING
Allow the heater to cool completely. Store heater with cord in a dry location & do not
place any heavy items on top during storage as this may result in damage. Store the cord in
a clean, dry location away from metal objects. Always check the plug before use to assure
metal items have not become attached.
CRANE CUSTOMER CARE
CALL US: 888-599-0992 (Mon-Fri 9:00am – 4:00pm CST)
EMAIL US: customer-service@crane-usa.com
LIVE CHAT: available at www.crane-usa.com
To Next Page
Loading...
