Crane EE-8000 - Technical Specifications & Placement; Diffuser Placement Guidelines

7
TECHNICAL SPECIFICATIONS
Rating Voltage
100-240V
Frequency
50/60Hz
Water Capacity
3oz / 88ml
Run Time
Up to 5-6 hours
BEFORE EACH USE:
CHECK DIFFUSER PLACEMENT:
Place the diffuser on an elevated, non-metallic, lint-free, waterproof, level surface at
least 2 feet above the floor.
• DO NOT PLACE ON CARPET OR TOWEL. The fan
vent is located on the bottom of the base. The fan
vent MUST NOT be obstructed.
• DO NOT PLACE ON WOOD SURFACE or near
furniture that can be damaged by oils or too much
moisture.
CAUTION
• DO NOT attempt to operate the diffuser without water in the base.
• DO NOT plug or unplug the Power Cord with wet hands as electric shock could
occur.
ASSEMBLY & USE