Crane NRI G-13.mft cctalk User Manual

National Rejectors, Inc. GmbH • Zum Fruchthof 6 • D-21614 Buxtehude
Phone: +49 (0) 41 61-729-0 • Fax: +49 (0) 41 61-729-115 • E-Mail: info@nri.de • Internet: www.nri.de
Technical Documentation
11.05 Hns/ds
Edition 1.0
KA.cctalkPC-GB
Electronic coin validator
G-13.mft cctalk
Installation and testing instructions for PC applications

Crane NRI G-13.mft cctalk Specifications

General

Protocol	cctalk
Power Supply	12V DC
Interface	Serial
Operating Temperature	0°C to 45°C
Humidity	Up to 95% non-condensing

Summary

About these instructions

The PC solutions for G-13.mft cctalk

Power supply requirements

Specifies required technical data for a standard wall power supply for the G-13.mft cctalk.

RS-232 Adapter Connection

Connects the G-13.mft using the NRI RS-232 adapter G-55.0480 to the PC via a serial interface.

USB Adapter Connection

Connects the G-13.mft using the NRI USB adapter G-55.0481 to the PC via USB, requiring driver installation.

Integrated USB Port Connection

Connects the G-13.mft directly to the PC using its integrated USB port and a standard USB cable.

Installation of the USB driver

Details the process of installing the VCP driver for the G-13.mft cctalk when using a USB port.

Demo software operations

Demo software system requirements

Lists the minimum hardware and software requirements for running the 'cctalk-Demo' application.

Install demo software guide

Guide on how to download and unpack the 'cctalkDemo.zip' freeware for testing the G-13.mft cctalk.

Starting the demo software

Steps to launch and configure the 'cctalkDemo.exe' application for PC communication with the validator.

Testing G-13.mft cctalk functions

Explains how to use the demo software interface to test validator functions, settings, and coin sorting.