75 Cranesmart LMI Version R9
Language
The Language selection enables you to change the Language of the Display panel.
1. From the Top Menu screen, use the Up or Down arrows and select Options.
2. Use the Up or Down arrows, select Language.
3. Use the Up or Down arrows, select the language of choice. The panel text will now change to the newly selected language.
4. Press Accept twice to save.
5. Use the Up or Down arrows to select Top Menu to continue with Supervisor permission or, Select Exit to return to Primary Operating Screen
and Operator Permission level.
Units
The Units selection enables you to change the units of measurement displayed by the panel.
1. From the Top Menu screen, use the Up or Down arrows and select Options.
2. Use the Up or Down arrows, select Units.
3. Use the Up or Down arrows, select the units of choice. The panel text will now change to the newly selected units.
4. Press Accept twice to save.
5. Use the Up or Down arrows to select Top Menu to continue with Supervisor permission or, Select Exit to return to Primary Operating Screen
and Operator Permission level.
BDT Default
BDT Default allows the supervisor to choose what position will be used for load chart selection in the event that the BDT
system is disabled.
1. From the Top Menu screen, use the Up or Down arrows and select Options.
2. Use the Up or Down arrows, select BDT Default.
3. Use the Up or Down arrows, select the position to be used for the default.
4. Press Accept twice to save.
NOTE:
The BDT Default selection only applies when the Cranesmart™ System has been equipped with a BDT
To Next Page