Need help?Do you have a question about the Crate Palomino V32 and is the answer not in the manual?
General| Power Output | 30 Watts |
|---|---|
| Speaker | 1 x 12" |
| Channels | 2 |
| Preamp Tubes | 4 x 12AX7 |
| Power Tubes | 4 x EL84 |
| Effects Loop | Yes |
| Footswitch | Yes |
| Type | Tube |
| Reverb | Yes (Spring Reverb) |
| Controls | Volume, Treble, Middle, Bass, Reverb, Master Volume, Gain |
| Inputs | 1 x 1/4" |
| Outputs | Speaker Out |
Controls for instrument input, channel selection, and clean channel output level.
Controls for overdrive gain, level, and equalization (treble, mid, bass).
Controls for boost, presence, reverb, plus power indicator and standby switch.
Details on the grounded power cord and proper outlet connection.
Describes line out, line in, and speaker connections for external use.
Explains the footswitch jack for channel switching and boost function.
Traces the development of vacuum tubes from Edison to modern use.
Explains preamplifier and power tubes and their sonic characteristics.
Discusses signs of tube wear and when to replace preamplifier and power tubes.
Details the importance of bias voltage for performance and tube longevity.
Provides recommendations for prolonging tube life and amplifier maintenance.
To Next Page
