Crate&Barrel Andersen Crib - Step 3: Attach Right End Panel to Side Panels; Connect Right End Panel to Side Panels; Secure Side Panel Connections

800.967.6696 | crateandbarrel.com
Carefully place mattress support panel onto corresponding pins of assembly and secure with 4 bolt caps as shown.
Secure each cap with large Allen wrench.
Locate levelers on each leg and adjust as necessary. Assembly is now complete.
Made in Vietnam - r05
Andersen Crib Assembly Instructions
Page 5 of 6
5
6
NOTE: Make sure
metal plate of mattress
panel is at the bottom
during assembly