EasyManua.ls Logo

Crate&Barrel Ever Simple Crib User Manual

Crate&Barrel Ever Simple Crib
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
• Failure to follow these warnings and assembly instructions could result in serious injury or death.
• Read all instructions before assembling crib. Keep instructions for future use.
• For toddler bed use, the minimum age shall be no less than 15 months, and the maximum weight shall not be
greater than 50 lb (22.7 kg).
• Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding under an
infant.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless
otherwise advised by your physician.
Strangulation Hazard:
• Strings can cause strangulation! DO NOT place items with a string, cord or ribbon around a child’s neck, such as
hood strings or pacifier cords. DO NOT suspend strings over crib or toddler bed, or attach strings to toys for any
reason.
• To help prevent strangulation, tighten all fasteners. A child can trap parts of the body or clothing on loose fasteners.
• DO NOT place crib or toddler bed near windows where cords from blinds or drapes may strangle a child.
Fall Hazard:
• When child is able to pull to standing position, set mattress to lowest position and remove bumper pads, large toys
and other objects that could serve as steps for climbing out.
• When child is able to climb out or reaches the height of 35 inches (90 cm), the crib shall no longer be used and the
child should be placed in a youth or regular bed.
CAUTION: ANY MATTRESS USED IN THIS CRIB
MUST BE AT LEAST 27-1/4 INCHES (69 cm) BY 51-5/8
INCHES (131 cm) WITH A THICKNESS NOT EXCEEDING
6 INCHES (15 cm).
• Check this product for damaged hardware, loose joints, missing parts or sharp edges before and after assembly and
frequently during use. Securely tighten loose bolts and other fasteners. DO NOT use crib if any parts are missing,
damaged, or broken. Contact Crate and Barrel® for replacement parts and instructional literature if needed. DO NOT
substitute parts.
• If refinishing, use a non-toxic finish specified for children’s products.
• Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
• Infants can suffocate in gaps between crib sides and a mattress that is too small.
• Periodically check to see that all bolts are securely tightened.
• To clean crib: Wipe with clean soft cloth dampened with a mild cleanser and water. Rinse with clean water using a
soft cloth, and dry thoroughly.
• Follow warnings on all products in a crib.
• When a vaporizer is in use, always aim vapor steam away from the crib as well as away from other wood furniture.
WARNING:
!
!
WARNING:
!
800.967.6696 | crateandbarrel.com
Made in China - r12
Ever Simple Crib Assembly Instructions
Question and Answer IconNeed help?

Do you have a question about the Crate&Barrel Ever Simple Crib and is the answer not in the manual?

Crate&Barrel Ever Simple Crib Specifications

General IconGeneral
Product NameEver Simple Crib
BrandCrate&Barrel
CategoryIndoor Furnishing
TypeCrib
Converts toToddler bed
Mattress CompatibilityStandard crib mattress (sold separately)
Weight Capacity50 lbs
Assembly RequiredYes
Safety StandardsASTM, CPSC
Dimensions54"W x 30"D
Adjustable Mattress Heights3 levels
Warranty1 year
MaterialSolid poplar and engineered wood

Summary

Important Safety Information

General Warnings and Precautions

Covers critical safety instructions for crib usage, assembly, and potential hazards.

Strangulation Hazard Details

Specific warnings about items with strings or cords around the crib or child.

Fall Hazard Management

Instructions for preventing falls as the child grows, including mattress height.

Mattress Size Requirements

Mandatory dimensions for any mattress used within the crib.

Product Identification and Warnings

Hardware Components List

Lists and illustrates all hardware pieces required for assembly.

Crib Structural Components

Identifies the main parts of the crib, such as end and side panels.

Small Parts Choking Hazard

Alerts users to the presence of small parts in the unassembled kit.

Crib Assembly Steps

Attach Support Brackets to Mattress Panel

Connecting support brackets to the mattress support panel using small bolts.

Assemble Side Panel to Left End Panel

Joining a side panel to the left end panel with large bolts and washers.

Crib Assembly Continued

Install Mattress Panel and Brackets

Fitting the mattress panel and attaching brackets to the left end panel.

Attach Right End Panel

Securing the right end panel to the crib structure with large bolts.

Final Assembly Stages

Attach Brackets to Right End Panel

Connecting support brackets to the right end panel and tightening all bolts.

Position Crib and Adjust Levelers

Erecting the crib and making adjustments to the base levelers.

Product Care and Maintenance

Cleaning Crib Surfaces

Guidance on cleaning the crib with mild solutions and soft cloths.

Regular Maintenance Checks

Ensuring all hardware remains tight and inspecting for wear or damage.

Storage Recommendations

Guidelines for long-term storage to prevent damage.

Related product manuals