Crate&Barrel Ever Simple Crib - Final Assembly Stages; Attach Brackets to Right End Panel; Position Crib and Adjust Levelers

800.967.6696 | crateandbarrel.com
Attach right end panel to crib assembly as shown with 4 large bolts and 4 lock washers. Secure, but do not fully
tighten, with an Allen wrench.
low
3
4
Ever Simple Crib Assembly Instructions
Page 4 of 6
Made in China - r12
Determine the desired height (low, middle, high) for the crib mattress. With assistance of another adult, fit mattress
panel into crib assembly as shown. Attach support brackets to left end panel with 1 end panel bolt and 1 lock washer
per bracket. Secure, but do not fully tighten, with an Allen wrench.
NOTE: Make sure support
brackets are facing up
during assembly
high
middle
right end
panel