Crate&Barrel LINEA BED WITH SLATS User Manual

SYMBOLS
NOTICE
IN YOUR PACKAGE :
ASSEMBLY INSTRUCTION
HARDWARE ( AS LISTED ABOVE )
PARTS TO BE INSTALLED
HARDWARES
LINEA BED - WITH SLATS
ASSEMBLY INSTRUCTION FOR BED INSTALLATION
X2
USE SCREW DRIVER
TO TIGHTEN
USE HANDNUMBER OF
PERSON NEEDED
DIRECTION
Crate&Barrel
TOOLS (Not Included in Package)
RUBBER HAMMER
1. HEADBOARD 1pc
2. FOOTBOARD 1pc
3. SIDERAILS 2pcs
4. 1pcs
5. 1pc
6. 13pcs
CENTER SUPPORT
CENTER LEG
SLATS
SCREW DRIVER
Crate&Barrel
DRILLING MACHINE
USE DRILLING
MACHINE
3
2
3
5
6
4
1
SCREW Ø6 x 2'
(1X)
SCREW Ø6 x 3'
(4X)
NUT
(4X)
METAL CORNER
(4X)
WASHER
(4X)
SCREW Ø4 x 2cm
(32X)
1/3

Crate&Barrel LINEA BED WITH SLATS Specifications

General

Category	Indoor Furnishing
Type	Bed
Slats Included	Yes
Style	Modern
Bed Type	Platform
Assembly Required	Yes
Material	Solid wood and engineered wood
Finish	Natural
Slat Type	Wood

Summary

Bed Assembly Overview

Package Contents and Hardware

Lists items included in the package and necessary hardware for assembly.

Tools Required for Assembly

Identifies tools that are not included in the package but are needed for installation.

Assembly Symbols and Notices

Explains common symbols used in instructions and provides important notices.

Connecting Side Rails and Frame

Connect Side Rail to Head/Foot Board

Attaches side rails to the headboard and footboard using provided hardware.

Install Metal Corners

Secures the bed frame corners with metal brackets for stability.

Installing Center Support and Slats

Install Center Leg and Support

Attaches the center leg and support beam to the bed frame.

Install Bed Slats

Places and secures the wooden slats across the bed frame.