Crate&Barrel Lotus Series User Manual

1/5
800.967.6696 | crateandbarrel.comMadein USA - r03
English
This page lists the contents included in the box. Please
take time to identify the hardware as well as the individual
components of the product. As you unpack and prepare for
assembly, place the contents on a carpeted or padded area
to protect them from damage. Please follow the assembly
instructions closely. Improper assembly can result in
personal or property damage.
Français
Cette feuille présente la liste du matériel contenu dans le
carton. Veuillez prendre un moment pour identifier chaque
pièce de quincaillerie et chacune des composantes. Afin de
protéger les composantes du meuble, les poser sur un
tapis ou sur une surface matelassée au fur et à mesure du
déballage et de la préparation au montage. Veuillez suivre
avec attention les étapes du montage présentées. Si le
meuble n’est pas monté correctement, il y a risque de
dégâts pour vous ou vos biens.
Español
Esta página muestra el contenido de la caja. Por favor
tome tiempo para identificar las partes al igual que los
componentes individuales del producto. A medida que
desempaqueta y se prepara para el montaje, coloque los
contenidos sobre un área alfombrada o acolchada para
protegerlos de daños. Por favor siga las instrucciones de
montaje al pie de la letra. El montaje incorrecto puede
producir daños personales o de bienes.
Lotus Bed / Lit / Cama - King
!
x 52
Not Included
Non Inclus
No Incluido
Not Included
Non Inclus
No Incluido
x 02x 13
x 04
x 02
x 02
x 01
x 01

Crate&Barrel Lotus Series Specifications

General

Brand	Crate&Barrel
Model	Lotus Series
Category	Indoor Furnishing
Language	English

Summary

Product Contents Overview

Hardware Identification

Identify all hardware and individual product components before assembly. Protect parts during unpacking.

Assembly Instructions

Step 1: Attach Side Rails

Attach side rail components to the bed posts using the specified hardware.

Step 2: Connect Frame

Connect the main frame pieces, ensuring proper alignment for stability.

Step 3: Secure Supports

Use the provided wrench to secure support brackets to the bed frame.

Step 4: Install Crossbars

Attach the crossbars to the frame using screws (B) and brackets (A).

Step 5: Add Slats

Position and secure the bed slats onto the frame using screws (A).

Step 6: Place Support Blocks

Install support blocks (A) and secure with screws (B) to reinforce the frame.

Step 7: Final Slat Attachment

Attach all remaining bed slats using the provided screws (x40).

Cleaning and Care