Crate&Barrel French User Manual

Made in China - r07
French Kitchen Large Island / Grande Îlot de Cuisine / Gran Isla de la Cocina
1/8
800.967.6696 | crateandbarrel.com
!
English
This page lists the contents included in the box. Please
take time to identify the hardware as well as the individual
components of the product. As you unpack and prepare for
assembly, place the contents on a carpeted or padded area
to protect them from damage. Please follow the assembly
instructions closely. Improper assembly can result in
personal or property damage.
Français
Cette feuille présente la liste du matériel contenu dans le
carton. Veuillez prendre un moment pour identifier chaque
pièce de quincaillerie et chacune des composantes. Afin de
protéger les composantes du meuble, les poser sur un
tapis ou sur une surface matelassée au fur et à mesure du
déballage et de la préparation au montage. Veuillez suivre
avec attention les étapes du montage présentées. Si le
meuble n’est pas monté correctement, il y a risque de
dégâts pour vous ou vos biens.
Español
Esta página muestra el contenido de la caja. Por favor
tome tiempo para identificar las partes al igual que los
componentes individuales del producto. A medida que
desempaqueta y se prepara para el montaje, coloque los
contenidos sobre un área alfombrada o acolchada para
protegerlos de daños. Por favor siga las instrucciones de
montaje al pie de la letra. El montaje incorrecto puede
producir daños personales o de bienes.
x 16
x 01
x 12
x 32
x 06
A
B
C
E
x 08
D
x 06
x 06
F
G

Crate&Barrel French Specifications

General

Brand	Crate&Barrel
Model	French
Category	Indoor Furnishing
Language	English

Summary

Product Overview and Preparation

Identify Contents and Prepare for Assembly

Lists box contents, advises identifying hardware and components, and preparing a safe assembly area.

Component Identification

Provides a visual list of all individual parts and hardware required for assembly.

Assembly Steps

Step 1: Assemble Base Frame

Attaches side frames (U, V) to the main structure (L) using hardware A and B.

Step 2: Attach Side Supports

Connects side supports (I) to the frame, securing with hardware A and B.

Step 3: Install Drawer Slides

Installs drawer slide components (M, N, O) onto the frame using hardware C and E.

Step 4: Attach Drawer Support Beam

Secures the drawer support beam (J) to the frame using hardware E and D.

Step 5: Install Back Panel

Attaches the back panel (H) to the frame using hardware B and C.

Step 6: Attach Side Brackets

Secures side brackets (A, E) to the frame using hardware B and C.

Step 7: Insert Drawers

Slides the assembled drawers (P, Q) into the installed slides.

Step 8: Place Top Surface

Positions the tabletop (K) onto the assembled frame.

Step 9: Attach Drawer Pulls

Installs drawer pulls (F) and shelf brackets (G) using hardware.

Step 10: Install Shelves

Places the shelves (R, S) into the designated slots.

Cleaning and Care Instructions